Standard cylinder(Profile)

※Installation and application

1. When the load has change during work, it is necesary to select the cylinder with sufficient output force.

2. At high temperatures or corrosive conditions, it is necessary to select the corresponding high- temperature

resistance and corrosion resistance cylinder;

3. In the cases of high humidity, excessive dust, or water drop, oill dust, and welding slag. necessary protective

measures shall be taken tor the cylinder;

4. Before connecting the cylinder to the peline, it Is necessary to remove dirt in the peline to avold Impurity

entry into the cylinder;

5. Medium for the cylinder can be used after being filtered by the fltler element above 40 um.

6. In low temperature environment. it is necessary to take antifreezing measures to prevent waler freezing in the syslem.

7. Before u3e. the cylinder shall undergo no-load test run; before running. it is necessary to adjust buffer to aminimum and then gradually loosen it to avoid cylinder damage due to too large impact;

8. The cylinder shall be avoided from laleral load during work to maintain normal work of the cylinder and extend its service life;

9. When the cylinder is removed and not used for a long time, it is necessary to pay attention to the surface rust; in adition, alrinlet and exhaust port shall be applied with dustproof plug cap ddionally.

■Product feature(Standard type:SC)

1. The enterprise's standard cylinder

2. The piston seal is applied with the profiled double-direction seal structure, which has compact dimensions and oil storage function;

3. It isa kind of pull rod cylinder; as its front and rear covers are connected with the aluminum pipe cylinder block with support, its reliability is high;

4. When comparing with ISO1 552 standard cylinder, SC series cylinder with same cylinder diameter is short;

5. The cylinder buffer adjustment is stable;

6. The cylinder and cylinder installation accessories with different specifications are available for the customer's selection and use;

7. As high temperature resistance sealing material is selected, it can guarantee normal work of the cylinder under the condition of 150C.

■ Product feature(Multi-position type:SCT)

1. The enterprise?s standard cylinder

2. The piston seal is applied with the profiled double.direction seal structure, which has compact dimensions and oil storage function;

3. It is a kind of pull rod cylinder; as its front and rear covers are connected with the aluminum pipe cylinder block with support, its reliability is high;

4. When comparing with ISO1 552 standard cylinder,SC series cylinder with same cylinder diameter is short;

5. The cylinder buffer adjustment is stable;

6. The cylinder and cylinder installation accessories with different specifications are available for the customer's selection and use;

7. As high temperature resistance sealing materialis selected, it can guarantee normal work of the cylinder under the condition of 150°C.