SC63*50 standard cylinder
QPC SC Series Pneumatic Actuator Standard Cylinder_QPC SC Series Pneumatic Actuator Standard Cylinder

QPC DSN Series Pneumatic Actuator Standard Cylinder_QPC DSN Series Pneumatic Actuator Standard Cylinder

DNC系列

DNC Series ISO15552 and VDMA24562

Standard cylinder

※Installation and application

1. When the load has change during work, it is necessary to select the cylinder with sufficient output force;

2. At high temperatures or corrosive conditions, it is necessary to select the corresponding high-temperature resistance and corrosion resistance cylinder;

3. In the cases of high humidity, excessive dust, or water drop, oil dust, and welding slag, necessary protective measures shall be taken for the cylinder;

4. Before connecting the cylinder to the pipeline, it is necessary to remove dirt in the pipeline to avoid impurity entry into the cylinder;

5. Medium for the cylinder can be used after being filtered by the filter element above 40 um.

6. In low temperature environment, it is necessary to take antifreezing measures to prevent water freezing in the system.

7. Before use, the cylinder shall undergo no-load test run; before running, it is necessary to adjust buffer to a minimum and then gradually loosen it to avoid cylinder damage due to too large impact;

8. The cylinder shall be avoided from lateral load during work to maintain normal work of the cylinder and extend its service lifte;

QCKA50*100-Y

QCK Series

Rotary clamp cylinder

※Installation and application

1. In the common cases such as: edge covering, assembling, and fixture test, it is necessary to select the standard welding and clamping cylinder;

2. In the surrounding high magnetic field produced by the welder, it is necessary to select the strong magnetic resistance welding and clamping cylinder and the corresponding strong magnetic resistance switch;

3. Before the cylinder piping, it is necessary to remove dirt in the pipeline to avoid impurity entry into the cylinder;

4. Medium for the cylinder can be used after being filtered by the filter element above 40 um;

5. In high temperature environment, it is necessary to take the corresponding high temperature resistance cylinder. In low temperature environment, it is necessary to take antifreezing measures to prevent water freezing in the system;

6. When the cylinder is removed and not used for a long time, it is necessary to pay attention to the surface rust; in addition,air inlet and exhaust port shall be applied with dustproof plug cap additionally and piston rod end shall be coated with anti-rust oil.

MAL20*50 Aluminium alloy mini cylinder
QPC MAL Series Pneuamtic Actuator Aluminium Alloy Mini Cylinder_QPC MAL Series Pneuamtic Actuator Aluminium Alloy Mini Cylinder

Standard cylinder(Profile)

※Installation and application

1. When the load has change during work, it is necesary to select the cylinder with sufficient output force.

2. At high temperatures or corrosive conditions, it is necessary to select the corresponding high- temperature

resistance and corrosion resistance cylinder;

3. In the cases of high humidity, excessive dust, or water drop, oill dust, and welding slag. necessary protective

measures shall be taken tor the cylinder;

4. Before connecting the cylinder to the peline, it Is necessary to remove dirt in the peline to avold Impurity

entry into the cylinder;

5. Medium for the cylinder can be used after being filtered by the fltler element above 40 um.

6. In low temperature environment. it is necessary to take antifreezing measures to prevent waler freezing in the syslem.

7. Before u3e. the cylinder shall undergo no-load test run; before running. it is necessary to adjust buffer to aminimum and then gradually loosen it to avoid cylinder damage due to too large impact;

8. The cylinder shall be avoided from laleral load during work to maintain normal work of the cylinder and extend its service life;

9. When the cylinder is removed and not used for a long time, it is necessary to pay attention to the surface rust; in adition, alrinlet and exhaust port shall be applied with dustproof plug cap ddionally.

■Product feature(Standard type:SC)

1. The enterprise's standard cylinder

2. The piston seal is applied with the profiled double-direction seal structure, which has compact dimensions and oil storage function;

3. It isa kind of pull rod cylinder; as its front and rear covers are connected with the aluminum pipe cylinder block with support, its reliability is high;

4. When comparing with ISO1 552 standard cylinder, SC series cylinder with same cylinder diameter is short;

5. The cylinder buffer adjustment is stable;

6. The cylinder and cylinder installation accessories with different specifications are available for the customer's selection and use;

7. As high temperature resistance sealing material is selected, it can guarantee normal work of the cylinder under the condition of 150C.

■ Product feature(Multi-position type:SCT)

1. The enterprise?s standard cylinder

2. The piston seal is applied with the profiled double.direction seal structure, which has compact dimensions and oil storage function;

3. It is a kind of pull rod cylinder; as its front and rear covers are connected with the aluminum pipe cylinder block with support, its reliability is high;

4. When comparing with ISO1 552 standard cylinder,SC series cylinder with same cylinder diameter is short;

5. The cylinder buffer adjustment is stable;

6. The cylinder and cylinder installation accessories with different specifications are available for the customer's selection and use;

7. As high temperature resistance sealing materialis selected, it can guarantee normal work of the cylinder under the condition of 150°C.