Consider the below steps to reset your Linksys Velop device. 

First, look at the bottom of the Linksys Velop device. There you can easily find the reset hole button. Now, push that button with the help of a paperclip for 8 to 10 seconds. Make sure during the reset process, the Linksys Velop device must be disconnected from the networked devices. Next, all the Linksys Velop LEDs will now turn off. As it defines that Linksys Velop device is now completely reset. 

Note: After resetting, you will need to do the Linksys Velop setup app process again. 

To configure the Linksys Velop device as an access point you will require to link it with the router. Consider the below steps once the Linksys Velop is connected. 

First, open the Linksys application on your cell phone. Now, at the upper right corner side of the Linksys Velop app pick the ‘settings’. Now, from the menu option select the ‘Wireless settings’. Next, hit on the name of the Linksys Velop router that appears in the List below ‘wireless settings. In the end, follow all the display instructions, to do the Linksys Velop configuration process.