Our 300-615 exam questions are related to test standards and are made in the form of actual tests. Whether you are newbie or experienced exam candidates, our 300-615 study guide will relieve you of tremendous pressure and help you conquer the difficulties with efficiency. If you study with our 300-615 Practice Engine for 20 to 30 hours, we can claim that you can pass the exam as easy as a pie. Why not have a try?

Cisco 300-615 certification exam is intended to test the candidate's ability to troubleshoot various Cisco Data Center Infrastructure components, including virtualization, automation, networking, storage, and security. 300-615 exam is designed to validate the candidate's ability to identify and resolve issues related to these components, and to ensure that they are able to provide efficient solutions to complex problems.

>> 300-615 Exam Material <<

Free PDF Quiz 300-615 - Troubleshooting Cisco Data Center Infrastructure Exam Material

If you are ready for the exam for a long time, but lack of a set of suitable 300-615 learning materials, I will tell you that you are so lucky to enter this page. We are such 300-615 exam questions that you can use our products to prepare the exam and obtain your dreamed 300-615 certificates. We all know that if you desire a better job post, you have to be equipped with appropriate professional quality and an attitude of keeping forging ahead. Our 300-615 exam questions will be your best ally to get what you wanted.

Cisco 300-615 exam is a 90-minute exam that consists of 60-70 questions. 300-615 exam format includes multiple-choice and simulation questions. 300-615 exam is designed to test the candidate's ability to identify, diagnose, and resolve complex data center infrastructure issues. 300-615 exam also tests the candidate's knowledge of troubleshooting methodologies and tools.

Cisco Troubleshooting Cisco Data Center Infrastructure Sample Questions (Q43-Q48):

NEW QUESTION # 43
Refer to the exhibit.

The integration between Cisco UCS Manager and Cisco UCS Central failed. Which action resolves the issue?

  • A. Implement the connectivity between the appliances through a firewall
  • B. Configure the shared secret key between the appliances
  • C. Implement the consistent NTP source between the appliances
  • D. Configure the certificate between the appliances

Answer: C


NEW QUESTION # 44
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.

Answer:

Explanation:


NEW QUESTION # 45
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?

  • A. 1- Disconnect the power cord
    2- Confirm that all cards are property seated
    3- Connect the power cord and power on the server
  • B. 1- Disconnect the power cord
    2- Confirm that all cards are properly seated
    3- Connect the power cord
  • C. 1- Power off the server and disconnect the power cord
    2- Confirm that all cards are available
    3- Connect the power cord and power on the server
  • D. 1- Power off the server and disconnect the power cord
    2- Confirm that all cards are property seated
    3- Connect the power cord and power on the server

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pd


NEW QUESTION # 46
Refer to the exhibit.

An engineer monitors a Cisco UCS server logs and discovers a blade discovery issue. Which procedure resolves the issue?

  • A. 1. Verify the FSM status on the server.
    2. Decommission the impacted server.
    3. Reset the slot where the server is located.
    4. Recommission the server.
  • B. 1. Verify the server power module.
    2. Decommission the faulty module.
    3. Insert a new power module.
    4. Recommission the new module.
  • C. 1. Verify that server platform power is failed
    2. Resolve the platform power issue.
    3. Reboot the server.
    4. Recommission the server.
  • D. 1. Verify that the power on self-test operation is failed.
    2. Verify that the server firmware is corrupted.
    3. Decommission the server firmware
    4. Recommission the server with new firmware.

Answer: A


NEW QUESTION # 47
Refer to the exhibit.

A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?

  • A. Enable the peer-gateway feature
  • B. Replace HSRP with GLBP
  • C. Remove the HSRP configuration
  • D. Configure ip arp synchronization on both switches.

Answer: A

Explanation:
Explanation
I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.


NEW QUESTION # 48
......

300-615 Exam Training: https://www.real4exams.com/300-615_braindumps.html