One failure makes many candidates fall into despair, become unconfident or even someone want to give up testing for IT certification. Now JN0-663 reliable practice exam online will help you out. It covers most real test questions and will assist you to clear exam certainly. You will be confident in your test. JN0-663 reliable practice exam online will be an important choice for your Juniper certification. Sometimes choice is greater than effort.

To prepare for the JN0-663 exam, candidates can take advantage of Juniper Networks' training resources, including instructor-led courses, e-learning modules, and self-study materials. In addition, candidates can gain hands-on experience with Juniper Networks products by participating in lab exercises and simulations, which are available through Juniper Networks' training partners. Passing the JN0-663 exam leads to the JNCIP-SP certification, which is a valuable credential for service provider network engineers and technicians looking to advance their careers.

>> Real JN0-663 Exams <<

100% Pass Quiz 2023 Unparalleled Juniper JN0-663: Real Service Provider Routing and Switching, Professional (JNCIP-SP) Exams

The test software used in our products is a perfect match for Windows' JN0-663 learning material, which enables you to enjoy the best learning style on your computer. Our JN0-663 certification guide also use the latest science and technology to meet the new requirements of authoritative research material network learning. Unlike the traditional way of learning, the great benefit of our JN0-663 learning material is that when the user finishes the exercise, he can get feedback in the fastest time. So, users can flexibly adjust their learning plans according to their learning schedule. We hope that our new design of JNCIP-SP test questions will make the user's learning more interesting and colorful.

Juniper Service Provider Routing and Switching, Professional (JNCIP-SP) Sample Questions (Q55-Q60):

NEW QUESTION # 55
You want to allow the load balancing of traffic for an EBGP route from two different peers in the same AS. Which three actions are needed to accomplish this task? (Choose three.)

  • A. An equal cost AS path for the route is required.
  • B. The multihop parameter should be configured under protocols BGP
  • C. A policy to load-balance traffic should be applied to the forwarding table
  • D. At least two interfaces should be connected to the same EBGP neighbor
  • E. The multipath parameter should be configured under protocols BGP

Answer: A,C,E


NEW QUESTION # 56
Exhibit.

Two CE devices (CE-1 and CE-2) belong to the same customer and connect into a single PE device (PE-1) However, the CE devices cannot communicate with each other You want to allow the CE devices to communicate with each other Referring to the exhibit, which action would solve the problem?

  • A. Configure both routing instances with the set routing-opt ions auto-export-statement
  • B. Configure both routing instances with the as-override statement within the BGP protocol
  • C. Configure both routing instances with the set routing-options autonomous-system loops 3 statement
  • D. Configure both routing instances with the vrf-table-label statement

Answer: A


NEW QUESTION # 57

You are receiving the same 200.0.0.0/24 BGP route from four different ISPs.
Referring to the exhibit, which ISP's route would be selected as active?

  • A. ISP-A
  • B. ISP-D
  • C. ISP-B
  • D. ISP-C

Answer: B


NEW QUESTION # 58
Exhibit:

A network administrator is concerned about the number of LSAs that they are observing on the network.
What will reduce Type 7 LSAs advertised from R2 to the non-backbone routers shown in the exhibit?

  • A. Configure no-summaries under area 0.0.0.2 on R2.
  • B. Configure no-summaries under protocols ospf3 on R2.
  • C. Configure nssa under area 0.0.0.2 on R2.
  • D. Configure no-naaa-abr under protocols ospf3 on R2.

Answer: D


NEW QUESTION # 59
Exhibit:

Your network connects two segments of your customer's network as shown in the exhibit They need to exchange routes between Segment 1 and Segment 2 but both segments use the same AS number.
Which two steps will accomplish this task? (Choose two.)

  • A. Configure the BGP group with the as-override parameter on routers R1 and R4.
  • B. Configure the routing-options autonomous-system loops 1 parameter on routers R1 and R4.
  • C. Configure the routing-options autonomous-system loops 1 parameter on routers R2 and R3.
  • D. Configure the BGP group with the advertise-peer-as parameter on routers R2 and R3.

Answer: B,D

Explanation:
https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/topic-map/autonomous-systems.html#id-example-enabling-bgp-route-advertisements


NEW QUESTION # 60
......

From the Test4Sure platform, you will get the perfect match JN0-663 actual test for study. JN0-663 practice download pdf are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical Juniper training material. JN0-663 Study Material is constantly begining revised and updated for relevance and accuracy. You will pass your real test with our accurate JN0-663 practice questions and answers.

JN0-663 PDF Questions: https://www.test4sure.com/JN0-663-pass4sure-vce.html