If you purchase our VMware Cloud Professional guide torrent, we can make sure that you just need to spend twenty to thirty hours on preparing for your exam before you take the exam, it will be very easy for you to save your time and energy. So do not hesitate and buy our 2V0-33.22 study torrent, we believe it will give you a surprise, and it will not be a dream for you to pass your VMware Cloud Professional exam and get your certification in the shortest time.

2V0-33.22 practice prep broke the limitations of devices and networks. You can learn anytime, anywhere. As long as you are convenient, you can choose to use a computer to learn, you can also choose to use mobile phone learning. No matter where you are, you can choose your favorite equipment to study our 2V0-33.22 Learning Materials. As you may know that we have three different 2V0-33.22 exam questions which have different advantages for you to choose.

>> Exam 2V0-33.22 Certification Cost <<

Latest Braindumps 2V0-33.22 Ppt, Test 2V0-33.22 Questions

Our 2V0-33.22 study materials can help you achieve your original goal and help your work career to be smoother and your family life quality to be better and better. There is no exaggeration to say that you will be confident to take part in you exam with only studying our 2V0-33.22 practice dumps for 20 to 30 hours. And thousands of candidates have achieved their dreams and ambitions with the help of our outstanding 2V0-33.22 training materials.

VMware 2V0-33.22 Exam Syllabus Topics:

VMware Cloud Professional Sample Questions (Q113-Q118):

NEW QUESTION # 113
What is a prerequisite step to adding additional users to a Google Cloud VMware Engine's vCenter (GCVE)?

• A. Escalate VMware vSphere privileges In the GCVE portal.
• B. Add a user in Google Cloud Platform Identity and Access Management.
• C. Change the default administrator password.
• D. Open a support ticket to escalate VMware vSphere privileges.

Answer: B

Explanation:
The prerequisite step to adding additional users to a Google Cloud VMware Engine's vCenter (GCVE) is to add a user in Google Cloud Platform Identity and Access Management. This will allow for the user to be added to the vCenter and properly authenticated.

NEW QUESTION # 114
Which two steps must an administrator take in order to deploy an instance of Azure VMware Solutions? (Choose two.)

• A. Deploy and configure Microsoft Enterprise Edge (MSEE) appliances.
• B. Create a support request with Microsoft Azure Support to create a host quota.
• C. Deploy and Configure Microsoft Azure ExpressRoute.
• D. Create a support request with VMware Support to create a private cloud.
• E. Associate the subscription with a Microsoft Enterprise Agreement.

Answer: B,E

Explanation:
According to the VMware Cloud Professional Administration guide, to deploy an instance of Azure VMware Solutions, an administrator must first create a support request with VMware Support to create a private cloud. This will enable the administrator to access the Azure VMware Solutions environment.
The guide also states that an administrator must associate the subscription with a Microsoft Enterprise Agreement in order to use Azure VMware Solutions. This will ensure that the administrator has the necessary permissions and access to the environment in order to configure and manage it.
Search results: [1] VMware Cloud Professional is a cloud service that provides a secure, reliable, and cost-effective way to deliver cloud-based solutions for organizations. [2] This guide provides step-by-step instructions to deploy and configure Microsoft Azure VMware Solutions [1], a cloud-based solution that enables organizations to run VMware workloads in the public cloud. [3] To deploy an Azure VMware Solution instance, the customer must have an active Microsoft Enterprise Agreement (EA) and a valid subscription associated with it. [4] The customer must also create a support request with VMware support to create a private cloud. This will enable the customer to access the Azure VMware Solutions environment. [5] Once the customer has created a support request and associated their
https://techzone.vmware.com/resource/manually-creating-optimized-windows-images-vmware-horizon-vms
1. Manually Creating Optimized Windows Images for VMware Horizon ...
https://techzone.vmware.com/resource/manually-creating-optimized-windows-images-vmware-horizon-vms
https://www.vmware.com/pdf/techsupportguide.pdf
VMware Technical Support Guide
https://www.vmware.com/pdf/techsupportguide.pdf
https://www.vmware.com/pdf/vchs_networking_guide.pdf
VMware vCloud Air Networking Guide - vCloud Air
https://www.vmware.com/pdf/vchs_networking_guide.pdf

NEW QUESTION # 115
A cloud administrator is using VMware HCX to migrate application workloads between an on-premises data center and a VMware Public Cloud (UI!) capability of VMware HCX is being used to extend a number of on-premises network segments into the cloud to avoid IP re-addressing concerns. When the cloud administrator tries to extend a native layer 2 network segment from the cloud back into the on-premises data center. an error is encountered and the extension fails. What should the administrator do to enable network extension from the cloud side to on-premises in this scenario?

• A. Install VMware NSXT into the on-prerinse data center.
• B. Enable reverse L2E in the advanced configuration menu of HCX. Make the appropriate change, re-deploy the on-premise HCX Manager and re-pair the sites together.
• C. Ensure that the on-premises environment that has at minimum a VMware vSphere Distributed Switch with version 6.5 configured.
• D. Enable reverse L2E in the advanced configuration menu of HCX. Make the appropriate change and re-deploy the HCX Service Mesh.

Answer: C

NEW QUESTION # 116
Which two steps does a cloud administrator need to take when protecting a VMware Cloud on AWS software-defined data center (SDDC) with VMware site Recovery? (Choose Two.)

• A. Set the NSX-T Edge management gateway firewall rules.
• B. Connect the Site Recovery manager instance on the protected recovery site.
• C. Register the vSphere Replication appliance with vCenter Single Sign-On
• D. Deploy the vSphere Replication virtual appliance.
• E. Deploy the Site Recovery manager virtual Appliance.

Answer: B,D

Explanation:
A cloud administrator needs to deploy the vSphere Replication virtual appliance and the Site Recovery manager virtual appliance when protecting a VMware Cloud on AWS software-defined data center (SDDC) with VMware Site Recovery.
The vSphere Replication virtual appliance is responsible for replicating the virtual machines from the source to the target site. Site Recovery Manager virtual appliance acts as the central management and orchestration platform for the entire disaster recovery process.
Reference:
In order to protect a VMware Cloud on AWS software-defined data center (SDDC) with VMware Site Recovery [1][2], a cloud administrator needs to take the following two steps:
A) Deploy the vSphere Replication virtual appliance - This can be done by logging into the vSphere Client, navigating to the vCenter Server, and then selecting the Deploy OVF Template option. From here, the cloud administrator can upload the OVF template for the vSphere Replication appliance and configure it.
B) Connect the Site Recovery manager instance on the protected recovery site - This involves logging into the Site Recovery Manager (SRM) and setting up the connection between the protected recovery site and the SRM instance. This can be done by going to the SRM dashboard and then selecting the Connect Remote Site option.
[1] https://docs.vmware.com/en/VMware-Site-Recovery/services/vmc-dr-deployment/GUID-DBF6CD69-6F7E-47E2-9417-91D5C5F5AC5E.html
[2] https://docs.vmware.com/en/VMware-Site-Recovery/services/vmc-dr-deployment/GUID-1C8B7BCA-D4BE-4EAF-9A8A-4B42E2B7236A.html

NEW QUESTION # 117
Refer to the exhibit.

A cloud administrator is deploying a new VMware Cloud on AWS virtual private cloud (VPC). After clicking on deploy, the screen refreshes and displays the information that is provided in the exhibit.
What is the issue with the management CIDR that is causing the deployment to fall?

• A. It overlaps with the AWS VPC CIDR.
• B. It is an invalid size.
• C. It is part of the reserved CIDRs.
• D. It overlaps with the AWS subnet.

Answer: D

Explanation:
https://docs.aws.amazon.com/whitepapers/latest/sddc-deployment-and-best-practices/deploying-vmware-cloud-on-aws-sddc.htmlThis must be a RFC1918 private address space (10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16) with CIDR block sizes of /16, /20, or /23. The management CIDR block cannot be changed after the SDDC is deployed. Choose a range of IP addresses that does not overlap with the AWS subnet you are connecting to. If you plan to connect the SDDC to an on-premises DC or another environment, the IP subnet must be unique within your enterprise network infrastructure. Choose a CIDR that will give you future scalability.

NEW QUESTION # 118
......

FreeDumps 2V0-33.22 exam dumps are audited by our certified subject matter experts and published authors for development. 2V0-33.22 exam dumps are one of the highest quality 2V0-33.22 Q&AS in the world. It covers nearly 96% real questions and answers, including the entire testing scope. FreeDumps guarantees you Pass 2V0-33.22 Exam at first attempt.

Latest Braindumps 2V0-33.22 Ppt: https://www.freedumps.top/2V0-33.22-real-exam.html