How to grasp the use skills of large format metal laser cutting machine? When using a large-format metal laser cutting machine to process objects, it is necessary to grasp some usage skills of the large-format metal laser cutting machine equipment, so as to better exert the effect of the equipment and improve the working efficiency of the equipment to the greatest extent.

1. Always check the steel belt and make sure it is tight. Otherwise, there is a problem in operation, which may injure people, and even lead to death. The steel belt looks like a small thing, but the problem is still a bit serious.

2. Check the straightness of the track and the verticality of the machine every six months, and timely maintain and debug if any abnormality is found. If this is not done, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the most important and must be done.

3. Use a vacuum cleaner to remove dust and dirt in the machine once a week, and all electrical cabinets should be closed to prevent dust.

4. Each guide rail should be cleaned frequently to remove dust and other debris, to ensure that the normal rack of the equipment should be wiped frequently, and lubricating oil should be added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.

5. The dual focal length laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head. Regular inspections and maintenance are required. If there is deformation or other forms, then you should know that the laser cutting head is a little damaged and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may require secondary processing, reducing production efficiency. The laser cutting head should be produced by a professional manufacturer, and it should be carefully checked when purchasing, so as to avoid problems when it is used.

The large-format metal laser cutting machine has great advantages in cutting thin plates within 4mm because it can be transmitted through optical fibers, the degree of flexibility is unprecedentedly improved, the number of failure points is less, the maintenance is convenient, and the speed is extremely fast, so the fiber cutting machine has great advantages when cutting thin plates within 4mm; The effect of wavelength It is of poor quality when cutting thick plates. The wavelength of the fiber laser laser cutting machine is 1.06um, which is not easily absorbed by non-metals, so it cannot cut non-metallic materials.

The photoelectric conversion rate of fiber laser is as high as 25%, and the advantages of fiber laser in terms of electricity consumption and supporting cooling system are quite obvious. According to international safety standards, laser hazard levels are divided into 4 levels. Fiber lasers are the most harmful to the human body due to their short wavelengths because they are harmful to the eyes. For safety reasons, fiber laser processing requires a fully enclosed environment. As an emerging laser technology, large-format metal laser cutting machine is far less popular than CO2 laser cutting machine.

Metal Laser Cutting Machine Manufacturer - Qiaolian & Cylion

In every process and every link, Qiaolian & Cylion, with a rigorous and responsible attitude, strives for perfection, constantly updates and improves our production equipment, testing system and testing equipment, strives for excellent quality, and constantly integrates new technologies for similar products. At home and abroad, continue to innovate and forge ahead. In the future development, we will bring "better products and more professional services" to our customers!

https://www.qiaoliangroup.com/Tips-For-Using-Large-Format-Metal-Laser-Cutting-Machine.html