- Male
- Followed by 1 people
Recent Updates
- ISO Circular Locus Pilling TesteruasISO Circular Locus Pilling Tester uses nylon brush or single abrasive to make the fabric rubbing and pilling according to the specified method and experimental parameters. Then, under the specified lighting conditions, the pilling specimen will be compared with the sample photo to assess the pilling level.
【ISO Circular Locus Pilling Tester Features】.
1, using Japan's THK imported slider, smooth running, silent effect is superb, suitable for long time continuous operation
2, the use of standard nylon brush, nylon wire rigidity must be uniform and consistent, so as to control the effect of nylon brush pilling.
3、The international popular streamline design, the surface adopts a spray molding, smooth and beautiful;
4、The domestic exclusive use of dual station design, touch screen display, digital setting.
[ISO Circular Locus Pilling Tester parameters].
1, pilling and pilling movement track: 40mm diameter circular track movement.
2, adjustable brushes: the use of effective height adjustable nylon brushes.
3, specimen pressure: chemical fiber fabric pressure is 590cN;
Fine combing woolen fabric pressure for 780cN;
Rough combed woolen fabric pressure for 490cN.
4, specimen specifications: diameter 112.8mm round, area 100 square centimeters.
5, the number of times to choose: 1 ~ 9999 arbitrary preset.
6、Specimen reciprocating speed: 60 times / min
7、Power supply: Ac220V 50Hz
8, motor: power 60W speed 60r / min
9、Exterior dimensions: 540 (L) × 250 (W) × 345 (H) mm
10、Weight: about 38Kg
ps: (WLJCDM809)
web:
https://www.standard-groups.com/en/TextileGarment/675.html
https://www.qinsun-lab.com
keyword:
circular locus tester,circular locus pilling tester,testex circular locus tester,circular pilling tester,round locus pilling tester,circular rubbing tester,pilling tester,brush pilling tester,brush or sponge pilling tester,textile pilling tester,circular abrasion tester,fuzzing and pilling tester,abrasion and pilling tester,martindale abrasion tester,fabric pilling test,pilling test of fabric,pilling testing machine, pilling resistance testISO Circular Locus Pilling Tester uses nylon brush or single abrasive to make the fabric rubbing and pilling according to the specified method and experimental parameters. Then, under the specified lighting conditions, the pilling specimen will be compared with the sample photo to assess the pilling level. 【ISO Circular Locus Pilling Tester Features】. 1, using Japan's THK imported slider, smooth running, silent effect is superb, suitable for long time continuous operation 2, the use of standard nylon brush, nylon wire rigidity must be uniform and consistent, so as to control the effect of nylon brush pilling. 3、The international popular streamline design, the surface adopts a spray molding, smooth and beautiful; 4、The domestic exclusive use of dual station design, touch screen display, digital setting. [ISO Circular Locus Pilling Tester parameters]. 1, pilling and pilling movement track: 40mm diameter circular track movement. 2, adjustable brushes: the use of effective height adjustable nylon brushes. 3, specimen pressure: chemical fiber fabric pressure is 590cN; Fine combing woolen fabric pressure for 780cN; Rough combed woolen fabric pressure for 490cN. 4, specimen specifications: diameter 112.8mm round, area 100 square centimeters. 5, the number of times to choose: 1 ~ 9999 arbitrary preset. 6、Specimen reciprocating speed: 60 times / min 7、Power supply: Ac220V 50Hz 8, motor: power 60W speed 60r / min 9、Exterior dimensions: 540 (L) × 250 (W) × 345 (H) mm 10、Weight: about 38Kg ps: (WLJCDM809) web: https://www.standard-groups.com/en/TextileGarment/675.html https://www.qinsun-lab.com keyword: circular locus tester,circular locus pilling tester,testex circular locus tester,circular pilling tester,round locus pilling tester,circular rubbing tester,pilling tester,brush pilling tester,brush or sponge pilling tester,textile pilling tester,circular abrasion tester,fuzzing and pilling tester,abrasion and pilling tester,martindale abrasion tester,fabric pilling test,pilling test of fabric,pilling testing machine, pilling resistance testTypeNewPrice$2022 (USD)StatusIn stock0 Comments 0 Shares - Rigid foam vertical combustion testeruasRigid foam vertical combustion tester
Rigid foam vertical burning tester is suitable for assessing the vertical burning performance of rigid foam under laboratory conditions, in accordance with GB/T8333-2008 "Rigid foam burning performance test method - vertical burning method" and ASTM D3014-04a test standard.
Combustion chamber.
1, the box: 0.15m3 (730mm wide × 280mm deep × 750mm high) using CNC machine tools processing molding, circular arc shape beautiful and generous. High-quality stainless steel material / baking paint, with beautiful anti-rust and anti-corrosion characteristics.
2、The top of the box is equipped with a smoke extraction system, when the test is completed, the exhaust gas can be discharged to the outdoors; during the test, the system is stopped.
3, the front of the box is equipped with a sealed tempered glass observation window during the test, easy to observe the test situation.
Combustion torch.
1、Spit specification: inner diameter Ф9.5mm, barrel length of 115mm.
2, flame height: 25 ~ 35mm height of the blue flame.
3, gas: more than 95% purity of natural gas.
4, with K-type thermocouple measured the internal flame temperature of 960 ℃.
Technical parameters.
1, blue flame kernel height: 25-30mm, adjustable;
2, gas flow: 0 ~ 1000 ml / min adjustable;
3, the use of U.S. Hamburg imported Bunsen burner flame temperature: (100-1000)℃ adjustable;
4, microcomputer control, automatic timing, automatic ignition;
5, imported temperature digital meter display;
6, gas source purity: ≥ 95% natural gas, propane;
7, power supply voltage: AC 220V ± 10V 50Hz;
8, ambient temperature: 10 ~ 35 ℃;
9、Relative humidity: ≤75﹪.
Reasons for choosing QINSUN instrument.
1, we have after-sales service team, the company engaged in the testing industry for more than 10 years, has accumulated a wealth of practical experience, to deal with a variety of problems in a timely and rapid manner, to relieve the customer's worries.
2, spare parts are available, to solve the long delivery period for ordering spare parts, while providing overall experimental solutions and experimental guidance.
3, to provide outsourced maintenance experimental testing services and experimental guidance.
4, we keep up with industry standards updates, timely provision of test instruments in line with the updated standards, to provide personalized testing and consulting services.
5, year-round supply, welcome customers call to inquire!
ps: (WLJCDM809)
web:
https://www.standard-groups.com/en/TextileGarment/1286.html
http://www.qinsun-lab.com/191.html
tag:
vertical flammability tester,flammability tester,vertical flammability test,flammability,vertical flammability chamber,fabric vertical flammability tester,horizontal vertical flammability tester,horizontal & vertical flammability tester,vertical flammability tester manufacturer,iso6941 fabric vertical flammability tester,ul94 vertical and horizontal flammability tester,flammability test chamber, flammability testing equipmentRigid foam vertical combustion tester Rigid foam vertical burning tester is suitable for assessing the vertical burning performance of rigid foam under laboratory conditions, in accordance with GB/T8333-2008 "Rigid foam burning performance test method - vertical burning method" and ASTM D3014-04a test standard. Combustion chamber. 1, the box: 0.15m3 (730mm wide × 280mm deep × 750mm high) using CNC machine tools processing molding, circular arc shape beautiful and generous. High-quality stainless steel material / baking paint, with beautiful anti-rust and anti-corrosion characteristics. 2、The top of the box is equipped with a smoke extraction system, when the test is completed, the exhaust gas can be discharged to the outdoors; during the test, the system is stopped. 3, the front of the box is equipped with a sealed tempered glass observation window during the test, easy to observe the test situation. Combustion torch. 1、Spit specification: inner diameter Ф9.5mm, barrel length of 115mm. 2, flame height: 25 ~ 35mm height of the blue flame. 3, gas: more than 95% purity of natural gas. 4, with K-type thermocouple measured the internal flame temperature of 960 ℃. Technical parameters. 1, blue flame kernel height: 25-30mm, adjustable; 2, gas flow: 0 ~ 1000 ml / min adjustable; 3, the use of U.S. Hamburg imported Bunsen burner flame temperature: (100-1000)℃ adjustable; 4, microcomputer control, automatic timing, automatic ignition; 5, imported temperature digital meter display; 6, gas source purity: ≥ 95% natural gas, propane; 7, power supply voltage: AC 220V ± 10V 50Hz; 8, ambient temperature: 10 ~ 35 ℃; 9、Relative humidity: ≤75﹪. Reasons for choosing QINSUN instrument. 1, we have after-sales service team, the company engaged in the testing industry for more than 10 years, has accumulated a wealth of practical experience, to deal with a variety of problems in a timely and rapid manner, to relieve the customer's worries. 2, spare parts are available, to solve the long delivery period for ordering spare parts, while providing overall experimental solutions and experimental guidance. 3, to provide outsourced maintenance experimental testing services and experimental guidance. 4, we keep up with industry standards updates, timely provision of test instruments in line with the updated standards, to provide personalized testing and consulting services. 5, year-round supply, welcome customers call to inquire! ps: (WLJCDM809) web: https://www.standard-groups.com/en/TextileGarment/1286.html http://www.qinsun-lab.com/191.html tag: vertical flammability tester,flammability tester,vertical flammability test,flammability,vertical flammability chamber,fabric vertical flammability tester,horizontal vertical flammability tester,horizontal & vertical flammability tester,vertical flammability tester manufacturer,iso6941 fabric vertical flammability tester,ul94 vertical and horizontal flammability tester,flammability test chamber, flammability testing equipmentTypeNewPrice$4500 (USD)StatusIn stock - ISO5660, ASTM E1354, GBT16172 Cone CalorimeteruasISO5660, ASTM E1354, GBT16172 Cone Calorimeter
The Cone Calorimeter is a core measurement parameter when evaluating the fire behavior of materials and products. The Cone Calorimeter meets all existing standards (including ISO 5660, ASTM E 1354, ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113, NFPA 264,
CAN ULC 135 and BS 476 part 15), and can also be purchased in component form, so that if a laboratory needs specific tests such as heat release, mass loss, smoke generation, etc., the required parts can be purchased first and then gradually supplemented with other instruments The same test chamber becomes a complete specification instrument. This flexibility is one of the many advantages of the Cone Calorimeter.
The test theory of the Cone Calorimeter is based on the fact that pure burning calories are proportional to the amount of oxygen burned. Every 1KG of oxygen burned will produce 13.1 MJ/kg of gas. The heat emission of the test gas, ignition time, oxygen consumption rate, CO, CO2 generation rate , the gas flow will be measured.
Model: TTech-GBT16172
standard
• ISO 5660: Tests for Response to Fire - Heat Release Rate, Smoke Generation Rate and Mass Loss Rate
• ASTM E 1354: Standard Test Method for Thermal and Visual Smoke Emission Rate of Materials
• BS 476 Pt.15: Testing of Building Materials and Building Structures: – Methods of Testing Product Heat Release Rates
• GB/T 16172-2007 Test method for heat release rate of building materials
• NFPA 264
Structural features
1.1, 19-inch standard cabinet integrated design, beautiful and easy to operate
1.2. Cone heater - in truncated cone, 230V, 5000W, heat output is 0~120 kW/m2
1.3, 19” touch screen computer controls the whole testing process
1.4, automatic ignition system, automatic measurement of burning time
1.5, 3 K-type thermocouples and 3-phase PID temperature controller to control the temperature
1.6. Automatic split gate - to protect the sample area before testing, to ensure stable initial quality measurement, and the operator can have extra time for system testing before the test starts. For flammable samples, it is easy to burn prematurely if there is no opening and closing mechanism. This extra time is very important for the operator
1.7. Sample holder - the sample size is 100mm x 100mm and the thickness does not exceed 50mm
tag:
cone calorimeter,skyline: cone calorimeter,calorimeter,cone calorimeter test,cone calorimeter method,skyline: cone calorimeter,en 45545-2 cone calorimeter,heat release cone calorimeter,heat release rate cone calorimeter,astm e1354 heat release cone calorimeter,cone calorimeter fire testing equipment,cone calorimeter with imported oxygen analyzer,cone calorimetry,cone test,tutorial,smoke generation rate test,engineering
ps: (WLJCDM809)
web: https://www.standard-groups.com/en/FlammabilityTesting/699.htmlISO5660, ASTM E1354, GBT16172 Cone Calorimeter The Cone Calorimeter is a core measurement parameter when evaluating the fire behavior of materials and products. The Cone Calorimeter meets all existing standards (including ISO 5660, ASTM E 1354, ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113, NFPA 264, CAN ULC 135 and BS 476 part 15), and can also be purchased in component form, so that if a laboratory needs specific tests such as heat release, mass loss, smoke generation, etc., the required parts can be purchased first and then gradually supplemented with other instruments The same test chamber becomes a complete specification instrument. This flexibility is one of the many advantages of the Cone Calorimeter. The test theory of the Cone Calorimeter is based on the fact that pure burning calories are proportional to the amount of oxygen burned. Every 1KG of oxygen burned will produce 13.1 MJ/kg of gas. The heat emission of the test gas, ignition time, oxygen consumption rate, CO, CO2 generation rate , the gas flow will be measured. Model: TTech-GBT16172 standard • ISO 5660: Tests for Response to Fire - Heat Release Rate, Smoke Generation Rate and Mass Loss Rate • ASTM E 1354: Standard Test Method for Thermal and Visual Smoke Emission Rate of Materials • BS 476 Pt.15: Testing of Building Materials and Building Structures: – Methods of Testing Product Heat Release Rates • GB/T 16172-2007 Test method for heat release rate of building materials • NFPA 264 Structural features 1.1, 19-inch standard cabinet integrated design, beautiful and easy to operate 1.2. Cone heater - in truncated cone, 230V, 5000W, heat output is 0~120 kW/m2 1.3, 19” touch screen computer controls the whole testing process 1.4, automatic ignition system, automatic measurement of burning time 1.5, 3 K-type thermocouples and 3-phase PID temperature controller to control the temperature 1.6. Automatic split gate - to protect the sample area before testing, to ensure stable initial quality measurement, and the operator can have extra time for system testing before the test starts. For flammable samples, it is easy to burn prematurely if there is no opening and closing mechanism. This extra time is very important for the operator 1.7. Sample holder - the sample size is 100mm x 100mm and the thickness does not exceed 50mm tag: cone calorimeter,skyline: cone calorimeter,calorimeter,cone calorimeter test,cone calorimeter method,skyline: cone calorimeter,en 45545-2 cone calorimeter,heat release cone calorimeter,heat release rate cone calorimeter,astm e1354 heat release cone calorimeter,cone calorimeter fire testing equipment,cone calorimeter with imported oxygen analyzer,cone calorimetry,cone test,tutorial,smoke generation rate test,engineering ps: (WLJCDM809) web: https://www.standard-groups.com/en/FlammabilityTesting/699.htmlTypeNewPrice$2022 (USD)StatusIn stock - GB/T7762-2003 rubber aging test chamberuasGB/T7762-2003 rubber aging test chamber
Rubber ozone aging test chamber by the ozone generator to produce a high concentration of ozone, can be used for non-metallic materials, organic materials (coatings, rubber, plastics, paints, pigments, etc.) in the ozone conditions of the aging test.
1、Studio size (mm): 350×350×410
2、Ozone concentration: 10~1000pphm.(adjustable)
3、Ozone concentration deviation: ≤5%
4、The temperature of the test room: 50℃~60℃
5、Temperature fluctuation: ±0.5℃
6、Uniformity: ±2℃
7、Test gas flow: 20~80L/min
8, test device: static (with 3 sets of manual tensile jig)
9、sample frame speed: 360 rotating sample frame (speed 1 rev per minute)
10, ozone source: ozone generator (the use of voltage silent discharge tube to generate ozone)
11、Sensor: British imported ozone concentration sensor, can achieve precise control
12、The instrument adopts "TMC-7512Z" type temperature controller produced by YHC, a Sino-foreign joint venture, with PID intelligent control, precise temperature control and strong ability to suppress temperature overshoot.
13、Secondary table: MCGS7062KX64 bit true color 7-inch touch screen.
14、This equipment meets the standard: GB/T7762-2003 ASTM1149 ISO1431
GB/T136421-92 HG/T2869-97
CONSTRUCTIVE MAIN FEATURE
PS: (WLJCDM809)
https://www.standard-groups.com/en/Weathering/708.html
https://www.qinsun-lab.com/173.html
keyword:
ozone aging test chamber,ozone aging chamber,ozone chamber,ozone test chamber,ozone aging test,ozone aging resistance test chamber,climatic chamber,ozone chambers,ozone aging tester,ozone chamber video,ozone aging oven,dynamic ozone chamber,ozone aging test machine,ozone aging test oven,ozone climatic test chamber,ozone exposure test chamber,ozone environmental chamber,ozone resistance test chamber,ozone environment test chamber
tag:
#ozoneagingtestchamber #ozoneagingchamber #ozoneagingchamber #ozonetestchamber #ozonechamber #ozoneagingtest #ozoneagingresistancetestchamberGB/T7762-2003 rubber aging test chamber Rubber ozone aging test chamber by the ozone generator to produce a high concentration of ozone, can be used for non-metallic materials, organic materials (coatings, rubber, plastics, paints, pigments, etc.) in the ozone conditions of the aging test. 1、Studio size (mm): 350×350×410 2、Ozone concentration: 10~1000pphm.(adjustable) 3、Ozone concentration deviation: ≤5% 4、The temperature of the test room: 50℃~60℃ 5、Temperature fluctuation: ±0.5℃ 6、Uniformity: ±2℃ 7、Test gas flow: 20~80L/min 8, test device: static (with 3 sets of manual tensile jig) 9、sample frame speed: 360 rotating sample frame (speed 1 rev per minute) 10, ozone source: ozone generator (the use of voltage silent discharge tube to generate ozone) 11、Sensor: British imported ozone concentration sensor, can achieve precise control 12、The instrument adopts "TMC-7512Z" type temperature controller produced by YHC, a Sino-foreign joint venture, with PID intelligent control, precise temperature control and strong ability to suppress temperature overshoot. 13、Secondary table: MCGS7062KX64 bit true color 7-inch touch screen. 14、This equipment meets the standard: GB/T7762-2003 ASTM1149 ISO1431 GB/T136421-92 HG/T2869-97 CONSTRUCTIVE MAIN FEATURE PS: (WLJCDM809) https://www.standard-groups.com/en/Weathering/708.html https://www.qinsun-lab.com/173.html keyword: ozone aging test chamber,ozone aging chamber,ozone chamber,ozone test chamber,ozone aging test,ozone aging resistance test chamber,climatic chamber,ozone chambers,ozone aging tester,ozone chamber video,ozone aging oven,dynamic ozone chamber,ozone aging test machine,ozone aging test oven,ozone climatic test chamber,ozone exposure test chamber,ozone environmental chamber,ozone resistance test chamber,ozone environment test chamber tag: #ozoneagingtestchamber #ozoneagingchamber #ozoneagingchamber #ozonetestchamber #ozonechamber #ozoneagingtest #ozoneagingresistancetestchamberTypeNewPrice$2022 (USD)StatusIn stock0 Comments 0 Shares - 45 ° angle rolling stock material combustion testerCHIANThe 45° angle rolling stock material combustion tester is suitable for the determination of the flame retardant properties of rolling stock flame retardant materials. Special manual igniter is safe and reliable.
Product Name: 45 ° angle rolling stock material combustion tester
Applicable standards.
For different standards, need to be equipped with different accessories:
TB/T 3138-2006 technical conditions of flame retardant materials for rolling stock
TB/T 2402-1993 flame retardant requirements for non-metallic materials for railway passenger cars
GA 303-2001 Flexible flame retardant polyurethane foam
Scope of application:
Applicable to the combustion test of 45° angle of the flame retardant material of rolling stock material.
Technical conditions:
1. Specimen 257mm×182mm
2、The specimen is placed at an angle of 45° at an angle of tilt
3, fuel container bottom center to the center of the sample vertical distance of 25.4mm
4, fuel container ¢ 17.5mm × 7.1mm, t0.8mm
5、Test conditions: temperature 15℃~30℃, humidity 60%RH~75%RH
ps: (WLJCDM809)
web:
https://www.qinsun-lab.com/1121.html
https://www.standard-groups.com/en/TextileGarment/695.html
tag:
45 degree flammability tester,flammability tester,flammability,45° flammability tester,automatic flammability tester,textiles 45 degree flammability tester,45 degree automatic flammability tester,flammability testing equipment,45° flammability test machine,spi flammability tester,flammability testing,flammability test chamber,45degree flammability tester,vertical flammability tester,45 degree flammability test chamber,horizontal flammability testerThe 45° angle rolling stock material combustion tester is suitable for the determination of the flame retardant properties of rolling stock flame retardant materials. Special manual igniter is safe and reliable. Product Name: 45 ° angle rolling stock material combustion tester Applicable standards. For different standards, need to be equipped with different accessories: TB/T 3138-2006 technical conditions of flame retardant materials for rolling stock TB/T 2402-1993 flame retardant requirements for non-metallic materials for railway passenger cars GA 303-2001 Flexible flame retardant polyurethane foam Scope of application: Applicable to the combustion test of 45° angle of the flame retardant material of rolling stock material. Technical conditions: 1. Specimen 257mm×182mm 2、The specimen is placed at an angle of 45° at an angle of tilt 3, fuel container bottom center to the center of the sample vertical distance of 25.4mm 4, fuel container ¢ 17.5mm × 7.1mm, t0.8mm 5、Test conditions: temperature 15℃~30℃, humidity 60%RH~75%RH ps: (WLJCDM809) web: https://www.qinsun-lab.com/1121.html https://www.standard-groups.com/en/TextileGarment/695.html tag: 45 degree flammability tester,flammability tester,flammability,45° flammability tester,automatic flammability tester,textiles 45 degree flammability tester,45 degree automatic flammability tester,flammability testing equipment,45° flammability test machine,spi flammability tester,flammability testing,flammability test chamber,45degree flammability tester,vertical flammability tester,45 degree flammability test chamber,horizontal flammability testerTypeNewPrice$2022 (USD)StatusIn stock - Intelligent salt spray test chamberuasIntelligent salt spray test chamber
Intelligent salt spray test chamber through the assessment of the material and its protective layer of the ability of salt spray corrosion, as well as similar protective layer of the process quality comparison, while the ability to assess the resistance of certain products to salt spray corrosion; products are suitable for parts, electronic components, metal materials and the protective layer of industrial products salt spray corrosion test.
Performance indicators:
Temperature range RT+5℃~55℃
Saturated barrel temperature RT+10℃~70℃
Temperature uniformity ≤2℃
Temperature fluctuation ±0.5℃
Salt mist deposition 1~2ml/80 cm².h (16 hours average)
Compressed air pressure 2.00±0.01(kg/cm²)
Spraying method Continuous/cycle optional
Test time 1~9999 H, M, S (adjustable)
Cycle time 1 to 99 H, M, S (adjustable)
Specimen frame angle can meet 15 °, 30 ° tilt test
Test method NSS test AASS test CASS test
Materials used:
Box material Corrosion-resistant, high-strength, anti-aging, high-temperature PP reinforced rigid plastic plate
Lid material Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced hard plastic sheet
Air saturated barrel Imported senior stainless steel SUS304
Air pressure pipe material High-quality rubber pipe
Other pipes Thickened fluorosilicone rubber tube
Notes.
1、The above data are measured under good ventilation when using the ambient temperature of 25℃
2, according to the user's specific test requirements non-standard custom walk-in salt spray test chamber, compound salt spray, low temperature salt spray, etc.
3、This technical information, subject to change without notice
PS: (WLJCDM809)
web:
https://www.qinsun-lab.com/Products/Property/Accelerated-Laboratory-Testing/1241.html
https://www.standard-groups.com/en/SaltFogChambers/880.html
email:info@qinsun-lab.com
tag:
salt spray test,salt spray test chamber,salt spray test machine,salt spray tester,spray,spray tester,compound salt spray tester,ywx salt spray test chamber,salt spray test equipment,salt spray chamber,spray test,best salt spray test,salt spray test pune,led tester lisun,salt spray test india,cyclic salt spray test,salt spray test report,natural salt spray test,salt spray corros test chamber,salt spray corrosive test,salt spray test bangaloreIntelligent salt spray test chamber Intelligent salt spray test chamber through the assessment of the material and its protective layer of the ability of salt spray corrosion, as well as similar protective layer of the process quality comparison, while the ability to assess the resistance of certain products to salt spray corrosion; products are suitable for parts, electronic components, metal materials and the protective layer of industrial products salt spray corrosion test. Performance indicators: Temperature range RT+5℃~55℃ Saturated barrel temperature RT+10℃~70℃ Temperature uniformity ≤2℃ Temperature fluctuation ±0.5℃ Salt mist deposition 1~2ml/80 cm².h (16 hours average) Compressed air pressure 2.00±0.01(kg/cm²) Spraying method Continuous/cycle optional Test time 1~9999 H, M, S (adjustable) Cycle time 1 to 99 H, M, S (adjustable) Specimen frame angle can meet 15 °, 30 ° tilt test Test method NSS test AASS test CASS test Materials used: Box material Corrosion-resistant, high-strength, anti-aging, high-temperature PP reinforced rigid plastic plate Lid material Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced hard plastic sheet Air saturated barrel Imported senior stainless steel SUS304 Air pressure pipe material High-quality rubber pipe Other pipes Thickened fluorosilicone rubber tube Notes. 1、The above data are measured under good ventilation when using the ambient temperature of 25℃ 2, according to the user's specific test requirements non-standard custom walk-in salt spray test chamber, compound salt spray, low temperature salt spray, etc. 3、This technical information, subject to change without notice PS: (WLJCDM809) web: https://www.qinsun-lab.com/Products/Property/Accelerated-Laboratory-Testing/1241.html https://www.standard-groups.com/en/SaltFogChambers/880.html email:info@qinsun-lab.com tag: salt spray test,salt spray test chamber,salt spray test machine,salt spray tester,spray,spray tester,compound salt spray tester,ywx salt spray test chamber,salt spray test equipment,salt spray chamber,spray test,best salt spray test,salt spray test pune,led tester lisun,salt spray test india,cyclic salt spray test,salt spray test report,natural salt spray test,salt spray corros test chamber,salt spray corrosive test,salt spray test bangaloreTypeNewPrice$2022 (USD)StatusIn stock0 Comments 0 Shares - Martindale Pilling Testeruas
Martindale Abrasion And Pilling Tester tests the abrasion and pilling properties of various plants. Under a certain pressure, the specimen is subjected to continuous commutation friction with a specified abrasive, and the degree of wear and pilling is evaluated in comparison with standard parameters. Touch screen control with full-featured programmer, pre-programmable batch and total count, individual setting of count for each test head; 4 speeds including standard speed can be selected.
Technical parameters.
1. Number of work stations: 9 work stations;
2. Counting range: 0~999999 times
3. Maximum dynamic range: horizontal 60.5±0.5mm, vertical 24±0.5mm
4. Pressurized object quality.
a. Gripper: 200±1g
b. Clothes specimen weight: 395±2g
c. Furniture ornaments specimen weight: 594±2g
d. Stainless steel butterfly: 260±1g
5. Effective friction diameter of the grinding block.
A type 200g (1.96N) friction head (9kPa) ¢ 28.8 -0.084mm
B type 155g (1.52N) friction head (12kPa) ¢90 -0.10mm
6. Gripper and grinding table relative movement speed: 20-70r / min (adjustable)
7. Loading sample pressure hammer mass: 2385 ± 10g
Instrument configuration and consumables.
1. 9 sets of sample clamps;
2.9kPa, 12kPa weights each 9;
3.Φ38mm and Φ140mm sampler each set;
4. Φ38mm and Φ140mm sampler pads;
5. One set of puckering test set;
6. One set of SM50 standard sample;
7. One set of EMPA standard puckering sample and SM-25 standard abrasive cloth 1.6m×5m;
8. Standard foam 1.5m×0.5m set (4 pieces/set);
9. Standard felt piece;
10.Φ90mm felt disc 20 pieces;
11. 50 pieces of Φ38mm and Φ140mm sampler blades each;
12. Other necessary accessories recommended by the manufacturer.
tag:
martindale abrasion and pilling tester,martindale abrasion tester,abrasion and pilling tester,martindale pilling tester,martindale abrasion and pilling test instrument,martindale abrasion test equipment,martindale abrasion tester price,martindale abrasion tester for sale,china martindale tester, martindale fabric abrasion tester, martindale abrasion test method, martindale abrasion tester procedure, martindale tester, martindale abrasion tester manual
PS: (WLJCDM809)
Qinsun Instruments Co., Ltd
web:https://www.qinsun-lab.com/10.htmlMartindale Abrasion And Pilling Tester tests the abrasion and pilling properties of various plants. Under a certain pressure, the specimen is subjected to continuous commutation friction with a specified abrasive, and the degree of wear and pilling is evaluated in comparison with standard parameters. Touch screen control with full-featured programmer, pre-programmable batch and total count, individual setting of count for each test head; 4 speeds including standard speed can be selected. Technical parameters. 1. Number of work stations: 9 work stations; 2. Counting range: 0~999999 times 3. Maximum dynamic range: horizontal 60.5±0.5mm, vertical 24±0.5mm 4. Pressurized object quality. a. Gripper: 200±1g b. Clothes specimen weight: 395±2g c. Furniture ornaments specimen weight: 594±2g d. Stainless steel butterfly: 260±1g 5. Effective friction diameter of the grinding block. A type 200g (1.96N) friction head (9kPa) ¢ 28.8 -0.084mm B type 155g (1.52N) friction head (12kPa) ¢90 -0.10mm 6. Gripper and grinding table relative movement speed: 20-70r / min (adjustable) 7. Loading sample pressure hammer mass: 2385 ± 10g Instrument configuration and consumables. 1. 9 sets of sample clamps; 2.9kPa, 12kPa weights each 9; 3.Φ38mm and Φ140mm sampler each set; 4. Φ38mm and Φ140mm sampler pads; 5. One set of puckering test set; 6. One set of SM50 standard sample; 7. One set of EMPA standard puckering sample and SM-25 standard abrasive cloth 1.6m×5m; 8. Standard foam 1.5m×0.5m set (4 pieces/set); 9. Standard felt piece; 10.Φ90mm felt disc 20 pieces; 11. 50 pieces of Φ38mm and Φ140mm sampler blades each; 12. Other necessary accessories recommended by the manufacturer. tag: martindale abrasion and pilling tester,martindale abrasion tester,abrasion and pilling tester,martindale pilling tester,martindale abrasion and pilling test instrument,martindale abrasion test equipment,martindale abrasion tester price,martindale abrasion tester for sale,china martindale tester, martindale fabric abrasion tester, martindale abrasion test method, martindale abrasion tester procedure, martindale tester, martindale abrasion tester manual PS: (WLJCDM809) Qinsun Instruments Co., Ltd web:https://www.qinsun-lab.com/10.htmlTypeNewPrice$4500 (USD)StatusIn stock0 Comments 0 Shares - Sunchex temperature and humidity adjustable xenon lamp aging testeruasSunchex temperature and humidity adjustable xenon lamp aging tester
Sunchex temperature-humidity adjustable xenon lamp aging tester is suitable for testing the color fastness of textiles to sunlight, chemical light stability, coating light aging, plastic parts light aging, rubber sunlight aging, building materials sunlight aging, etc.
Sunchex temperature and humidity adjustable xenon lamp aging test machine parameters:
The new Sunchex temperature and humidity adjustable solar color fastness tester uses a xenon arc lamp that simulates the full sunlight spectrum to reproduce the destructive light waves that exist in different environments, so as to quickly and quickly test the stability of dyes in textiles and other materials and materials Structural damage and weathering that is itself subject to sunlight. The light fastness tester can provide corresponding environmental simulation and accelerated test for scientific research, product development and product quality control, avoiding the deviation of results caused by the long cycle of natural exposure test and poor consistency of test conditions. It has good correlation, repeatability and reproducibility, and has a built-in temperature and humidity adjustment system to provide stable temperature and humidity conditions for testing.
300-400nm broadband illuminance controller to ensure constant irradiation of the xenon lamp within its service life;
Illumination control and monitoring in the range of 300-400nm up to 80W/m2;
Relative humidity monitoring control, and equipped with ultrasonic humidifier to ensure long-term reliable operation;
Black label thermometer to monitor and control temperature;
Microprocessor control;
Friendly and intuitive operating system, free to program up to 15 test programs;
Equipped with RS232 interface, the test results can be printed online directly
Italian craftsmanship, stable and reliable
ps: (WLJCDM809)
web:
https://www.qinsun-lab.com/443.html
https://www.standard-groups.com/en/Weathering/896.html
tag:
xenon lamp aging test chamber,xenon lamp test chamber,xenon lamp tester,xenon lamp aging chamber,xenon light fastness tester,introduction of xenon lamp aging test chamber,xenon lamp weathering test chamber,xenon tester,xenon weathering tester,xenon aging test machine ,xenon lamp,aging test chamber,xenon arc tester,xenon arc lamp test chamber,air-cooled xenon lamp weathering test chamber,xenon accelerated tester,how to use xenon fastness testerSunchex temperature and humidity adjustable xenon lamp aging tester Sunchex temperature-humidity adjustable xenon lamp aging tester is suitable for testing the color fastness of textiles to sunlight, chemical light stability, coating light aging, plastic parts light aging, rubber sunlight aging, building materials sunlight aging, etc. Sunchex temperature and humidity adjustable xenon lamp aging test machine parameters: The new Sunchex temperature and humidity adjustable solar color fastness tester uses a xenon arc lamp that simulates the full sunlight spectrum to reproduce the destructive light waves that exist in different environments, so as to quickly and quickly test the stability of dyes in textiles and other materials and materials Structural damage and weathering that is itself subject to sunlight. The light fastness tester can provide corresponding environmental simulation and accelerated test for scientific research, product development and product quality control, avoiding the deviation of results caused by the long cycle of natural exposure test and poor consistency of test conditions. It has good correlation, repeatability and reproducibility, and has a built-in temperature and humidity adjustment system to provide stable temperature and humidity conditions for testing. 300-400nm broadband illuminance controller to ensure constant irradiation of the xenon lamp within its service life; Illumination control and monitoring in the range of 300-400nm up to 80W/m2; Relative humidity monitoring control, and equipped with ultrasonic humidifier to ensure long-term reliable operation; Black label thermometer to monitor and control temperature; Microprocessor control; Friendly and intuitive operating system, free to program up to 15 test programs; Equipped with RS232 interface, the test results can be printed online directly Italian craftsmanship, stable and reliable ps: (WLJCDM809) web: https://www.qinsun-lab.com/443.html https://www.standard-groups.com/en/Weathering/896.html tag: xenon lamp aging test chamber,xenon lamp test chamber,xenon lamp tester,xenon lamp aging chamber,xenon light fastness tester,introduction of xenon lamp aging test chamber,xenon lamp weathering test chamber,xenon tester,xenon weathering tester,xenon aging test machine ,xenon lamp,aging test chamber,xenon arc tester,xenon arc lamp test chamber,air-cooled xenon lamp weathering test chamber,xenon accelerated tester,how to use xenon fastness testerTypeNewPrice$4500 (USD)StatusIn stock0 Comments 0 Shares - Safety helmet resistance UL94 Horizontal Vertical Flame TesteruasSafety helmet resistance UL94 Horizontal Vertical Flame Tester
Safety helmet flame retardant performance tester is designed according to GB/T 2812 "safety helmet test method" safety helmet flame retardant performance test standard, for testing the safety helmet flame retardant performance of special instruments. It is widely used in safety helmet manufacturers, major quality inspection units and construction engineering inspection stations.
Safety helmet flame retardant performance tester in line with the standard.
GB/T 2812-2006 "safety helmet test method" within the safety helmet flame retardant performance test standard requirements.
GB/T 2811-2007 "Safety helmet
Product features.
1, helmet resistance UL94 Horizontal Vertical Flame Tester adopts electronic ignition, safe and convenient, "push-pull" sample frame fixed device, "positioning wire" and "guide rail" auxiliary positioning. Guide rail" auxiliary positioning.
2、The burner is automatically positioned at regular intervals.
3, helmet resistance UL94 Horizontal Vertical Flame Tester ignition time 0-99.9 seconds arbitrary setting, renewal time, negative combustion time are automatically recorded, digital display.
4, equipped with highly sensitive combustible gas leakage alarm device, such as the discovery of combustible gas alarm and automatic gas cut-off.
5、Fuel supply device: pressure regulating valve, gas volume regulating valve, gas storage tank device, can ensure that the flame jet head stable spray 50mm length of blue flame.
6、Flame height can be adjusted, there is a flame height ruler to measure the flame height to assist in determining the flame height.
Main technical indicators.
1, time timer: display value error ± 1%, used to record the renewal of the flame time, accurate to 0.01s.
2, helmet resistance UL94 Horizontal Vertical Flame Tester flame imposed timer: display value error ± 1%, used to set the flame imposed on the helmet time, burning time can be set by themselves, the igniter timing range: 0-99.99 seconds.
3, equipped with flame height measuring device: 50mm high scale.
4, helmet resistance UL94 Horizontal Vertical Flame Tester ignition time 0-99.9 seconds arbitrary setting, automatic recording of the renewal of the burning time, the time of negative combustion.
5, flame height measuring device: 50mm high scale.
6, flame jet head: horizontally placed fuel nozzle, inner diameter 10mm.
7, Bunsen burner inner diameter 10mm ± 0.10mm.
8, helmet resistance UL94 Horizontal Vertical Flame Tester gas source: methane, propane, butane, liquefied petroleum gas.
9, the ambient temperature: -10 ℃ -30 ℃.
10 Safety Helmet Resistance UL94 Horizontal Vertical Flame Tester , relative humidity: ≤ 85%.
Safety helmet flame retardant performance tester main technical indicators.
Gas: industrial grade methane.
Application of flame time steplessly adjustable.
Digital display specimen burning time.
Bunsen burner horizontal direction jet flame.
Bunsen burner inner diameter 10mm±0.10mm.
The Bunsen burner is automatically moved away after the flame is applied.
PS: (WLJCDM809)
Qinsun Instruments Co., Ltd
web:
https://www.qinsun-lab.com/1231.html
https://www.standard-groups.com/en/FlammabilityTesting/939.html
tag:
vertical flame test,horizontal flame test,horizontal vertical flammability tester,horizontal vertical flame chamber,horizontal & vertical flammability tester,ul94 vertical and horizontal flammability tester,ul94 horizontal and vertical flame testing machine,flammability tester,horizontal flammability tester,flame test,vertical flammability tester,flame test machine,horizontal burning,ul94 flame test chamber,vertical,flame test apparatus,flame retardantSafety helmet resistance UL94 Horizontal Vertical Flame Tester Safety helmet flame retardant performance tester is designed according to GB/T 2812 "safety helmet test method" safety helmet flame retardant performance test standard, for testing the safety helmet flame retardant performance of special instruments. It is widely used in safety helmet manufacturers, major quality inspection units and construction engineering inspection stations. Safety helmet flame retardant performance tester in line with the standard. GB/T 2812-2006 "safety helmet test method" within the safety helmet flame retardant performance test standard requirements. GB/T 2811-2007 "Safety helmet Product features. 1, helmet resistance UL94 Horizontal Vertical Flame Tester adopts electronic ignition, safe and convenient, "push-pull" sample frame fixed device, "positioning wire" and "guide rail" auxiliary positioning. Guide rail" auxiliary positioning. 2、The burner is automatically positioned at regular intervals. 3, helmet resistance UL94 Horizontal Vertical Flame Tester ignition time 0-99.9 seconds arbitrary setting, renewal time, negative combustion time are automatically recorded, digital display. 4, equipped with highly sensitive combustible gas leakage alarm device, such as the discovery of combustible gas alarm and automatic gas cut-off. 5、Fuel supply device: pressure regulating valve, gas volume regulating valve, gas storage tank device, can ensure that the flame jet head stable spray 50mm length of blue flame. 6、Flame height can be adjusted, there is a flame height ruler to measure the flame height to assist in determining the flame height. Main technical indicators. 1, time timer: display value error ± 1%, used to record the renewal of the flame time, accurate to 0.01s. 2, helmet resistance UL94 Horizontal Vertical Flame Tester flame imposed timer: display value error ± 1%, used to set the flame imposed on the helmet time, burning time can be set by themselves, the igniter timing range: 0-99.99 seconds. 3, equipped with flame height measuring device: 50mm high scale. 4, helmet resistance UL94 Horizontal Vertical Flame Tester ignition time 0-99.9 seconds arbitrary setting, automatic recording of the renewal of the burning time, the time of negative combustion. 5, flame height measuring device: 50mm high scale. 6, flame jet head: horizontally placed fuel nozzle, inner diameter 10mm. 7, Bunsen burner inner diameter 10mm ± 0.10mm. 8, helmet resistance UL94 Horizontal Vertical Flame Tester gas source: methane, propane, butane, liquefied petroleum gas. 9, the ambient temperature: -10 ℃ -30 ℃. 10 Safety Helmet Resistance UL94 Horizontal Vertical Flame Tester , relative humidity: ≤ 85%. Safety helmet flame retardant performance tester main technical indicators. Gas: industrial grade methane. Application of flame time steplessly adjustable. Digital display specimen burning time. Bunsen burner horizontal direction jet flame. Bunsen burner inner diameter 10mm±0.10mm. The Bunsen burner is automatically moved away after the flame is applied. PS: (WLJCDM809) Qinsun Instruments Co., Ltd web: https://www.qinsun-lab.com/1231.html https://www.standard-groups.com/en/FlammabilityTesting/939.html tag: vertical flame test,horizontal flame test,horizontal vertical flammability tester,horizontal vertical flame chamber,horizontal & vertical flammability tester,ul94 vertical and horizontal flammability tester,ul94 horizontal and vertical flame testing machine,flammability tester,horizontal flammability tester,flame test,vertical flammability tester,flame test machine,horizontal burning,ul94 flame test chamber,vertical,flame test apparatus,flame retardantTypeNewPrice$2022 (USD)StatusIn stock0 Comments 0 Shares - Martindale Abrasion And Pilling Tester- nine headsuasMartindale Abrasion And Pilling Tester- nine heads
Round fabric specimens under a certain pressure, and standard abrasives according to Lissajous (Lissajous) curve of the movement of the trajectory of mutual friction, resulting in specimens broken, the number of times the specimen broken wear resistance to indicate the wear resistance of the fabric.
Martindale Abrasion And Pilling Tester conforms to the following standards.
GB/T 21196.1-2007 Textiles Martindale Abrasion And Pilling Tester Part 1
GB/T 21196.2-2007 Textiles Martindale Abrasion And Pilling Tester Part 2
GB/T 21196.3-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 3
GB/T 21196.4-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 4
GB/T 4802.2-1997 Textiles Fabric pilling test Martindale method
GB 8690-88 Woolen fabrics abrasion resistance test method Martindale method
ISO 12945-2:2002 Textiles Determination of surface pilling properties of fabrics Part 2 Martindale method
GB/T 13775-92 Abrasion resistance test for cotton, linen and silk woven fabrics Martindale method
ASTM D4966-1988 Fabric abrasion resistance test Martindale abrasion tester
ASTM D4970-2002 Test method for pilling resistance of fabrics Martindale tester
Technical parameters.
1、Number of bits: 9 bits
2、Counting range: 0~999999 times
3、Maximum dynamic range: Horizontal: 60±0.5mm Vertical: 24±0.5mm
4、Quality of pressurized object
a. Gripper: 198±2g
b. Clothes specimen weight hammer: 395±2g
c. Furniture ornament sample weight hammer: 595±2g
5、The effective friction diameter of the grinding block.
A type 200g (1.96N) friction head (9KPa) ¢28.8 -0.084mm
6, gripper and grinding table relative movement speed: 50 ± 2r / min, 47 ± 2r / min (1-120 r / min adjustable)
7、Mass of loading sample press hammer: 2385g±10
8、Appearance size: 885×600×410mm
9、Electricity source: Ac220V 50Hz 500W
10、Weight: 100kg
PS: (WLJCDM809)
Qinsun Instruments Co., Ltd
web:https://www.qinsun-lab.com/10.html
web:https://www.qinsun-lab.com/10.html
tag:martindale abrasion and pilling tester,martindale abrasion tester,martindale pilling tester,abrasion and pilling tester,martindale abrasion tester price,martindale abrasion tester martindale abrasion tester price,martindale abrasion and pilling test instrument,martindale abrasion test equipment,martindale abrasion tester for sale, martindale fabric abrasion tester,martindale abrasion test method,martindale abrasion tester procedure,martindale tester,martindale abrasion tester tester manual,china martindale testerMartindale Abrasion And Pilling Tester- nine heads Round fabric specimens under a certain pressure, and standard abrasives according to Lissajous (Lissajous) curve of the movement of the trajectory of mutual friction, resulting in specimens broken, the number of times the specimen broken wear resistance to indicate the wear resistance of the fabric. Martindale Abrasion And Pilling Tester conforms to the following standards. GB/T 21196.1-2007 Textiles Martindale Abrasion And Pilling Tester Part 1 GB/T 21196.2-2007 Textiles Martindale Abrasion And Pilling Tester Part 2 GB/T 21196.3-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 3 GB/T 21196.4-2007 Textiles Martindale method of determining the abrasion resistance of fabrics Part 4 GB/T 4802.2-1997 Textiles Fabric pilling test Martindale method GB 8690-88 Woolen fabrics abrasion resistance test method Martindale method ISO 12945-2:2002 Textiles Determination of surface pilling properties of fabrics Part 2 Martindale method GB/T 13775-92 Abrasion resistance test for cotton, linen and silk woven fabrics Martindale method ASTM D4966-1988 Fabric abrasion resistance test Martindale abrasion tester ASTM D4970-2002 Test method for pilling resistance of fabrics Martindale tester Technical parameters. 1、Number of bits: 9 bits 2、Counting range: 0~999999 times 3、Maximum dynamic range: Horizontal: 60±0.5mm Vertical: 24±0.5mm 4、Quality of pressurized object a. Gripper: 198±2g b. Clothes specimen weight hammer: 395±2g c. Furniture ornament sample weight hammer: 595±2g 5、The effective friction diameter of the grinding block. A type 200g (1.96N) friction head (9KPa) ¢28.8 -0.084mm 6, gripper and grinding table relative movement speed: 50 ± 2r / min, 47 ± 2r / min (1-120 r / min adjustable) 7、Mass of loading sample press hammer: 2385g±10 8、Appearance size: 885×600×410mm 9、Electricity source: Ac220V 50Hz 500W 10、Weight: 100kg PS: (WLJCDM809) Qinsun Instruments Co., Ltd web:https://www.qinsun-lab.com/10.html web:https://www.qinsun-lab.com/10.html tag:martindale abrasion and pilling tester,martindale abrasion tester,martindale pilling tester,abrasion and pilling tester,martindale abrasion tester price,martindale abrasion tester martindale abrasion tester price,martindale abrasion and pilling test instrument,martindale abrasion test equipment,martindale abrasion tester for sale, martindale fabric abrasion tester,martindale abrasion test method,martindale abrasion tester procedure,martindale tester,martindale abrasion tester tester manual,china martindale testerTypeNewPrice$10000 (USD)StatusIn stock0 Comments 0 Shares
More Stories