Industrial dust extractor is a good industrial cleaning equipment, especially in some industries that generate a lot of dust during the work process, it is an essential equipment. However, in the process of use, sometimes the suction power is weakened. As an experienced industrial dust extractor supplier, Kaisen will take you today to learn about the countermeasures for the weakened suction power of industrial vacuum cleaners and the management of industrial dust extractor.

Coping methods for weakened suction of industrial vacuum cleaners:

1. Dispose of the garbage in the dust bucket of the industrial vacuum cleaner first. Generally, if the garbage is too full, it will block the suction and reduce the suction power. It can be cleaned immediately.

2. Check the suction port, there may be large garbage stuck in the entrance, resulting in reduced suction.

3. Check whether the vacuum hose is bent anyway, and straighten it out in time.

4. If the filter element of the industrial vacuum cleaner is not cleaned for a long time, the blockage of the filter element will also cause the suction to become smaller. At this point, remove the filter element and take a picture, or clean it with an air pump and reinstall it.

After the above steps are completed, the suction power of the industrial vacuum cleaner is basically restored. If the suction is still very small, then check the vacuum cleaner motor to see if the carbon brushes are severely worn, and if they are to replace the new carbon brushes in time. If this problem has not been solved, please contact the industrial vacuum cleaner manufacturer in time to get better after-sales service!

Disadvantages of traditional cleaning in factories:

Traditional manual cleaning generally adopts sweeping, mopping, flushing and other methods. Compared with cleaning with an industrial dust collector, this cleaning method will raise the dust and scatter it in the air when sweeping, and then scatter on the equipment, causing serious secondary pollution. In particular, the parts on the equipment that are difficult to be cleaned manually will form dirt for a long time, which will affect the equipment. For sticky dirt on the ground, manual cleaning is even more difficult. If it is in the workshop, it is not realistic to rinse with water. At this time, if you use the industrial vacuum cleaner produced by Kaisen, it will have a multiplier effect!

Management measures for industrial vacuum cleaners:

1. Before use, check whether the power supply of the industrial vacuum cleaner is damaged, whether the machine head is stuck, and the vacuum tube is smooth and not bent. After everything is normal, turn it on and use it.

2. If you find that the suction power is reduced or hear an abnormal sound during use, please do not continue to work forcibly, turn off the power, check the equipment, and continue until everything is normal.

3. After each use of the industrial vacuum cleaner, the dust bucket should be cleaned in time to keep the dust bucket clean, and the outside of the machine should be kept clean to prevent the garbage from corroding the machine and reducing the life of the equipment.

Hope we can solve your problem with weakened suction power of industrial vacuum cleaner. If you have any problems that you cannot solve by yourself, please contact Kaisen in time, we are happy to provide you with solutions and perfect after-sales service!