How to distinguish the quality of stainless steel sinks? Stainless Steel Sink Manufacturers stated:
Measure the kitchen stainless steel sink than the thickness. Good stainless steel sinks are all made of thicker plates. Because the sink has been edge treated, it is difficult to see the thickness at once. The simple method is to press the surface of the sink a little bit. If it is pressed down, the material is very thin, of course. You can borrow the vernier caliper and the spiral micrometer without having to be so troublesome.
The weight of the stainless steel sink. Stainless steel is a kind of iron alloy. The specific gravity of steel is 7.87. Heavy metals such as nickel and chromium are added inside. The specific gravity of these metals is larger than that of steel, so the weight is relatively heavy. Look at the stainless steel sink process. The stainless steel sink material for the one-piece molding method is definitely better than the welding method.
Single slots are often the choice of families with too little kitchen space. The downside is that they may be inconvenient to use because they only meet basic cleaning functions. The double-slot is widely used, because the double-slot can meet the needs of cleaning and conditioning separately. At the same time, because the occupied space is not very large, the kitchen is not too small, and the double-slot design can be used. The sink has become the first choice for many families.
Because the three-slot or the mother-slot is a special-shaped design, it is a large kitchen suitable for individual styles, and it is quite practical. Because it can perform soaking, washing and storing functions at the same time, it can also make the food raw and cooked separately, saving time and effort, and it is very convenient to use.
After the sink is bought, the installer of the stainless steel sink manufacturer will cut the cabinet according to the size of the sink and then put it into the countertop. There will be a matching hanging piece between the table top and the sink. This is to ensure that the sink does not shake after it is installed, and it plays a fixed role.
When the hanging piece is used to reinforce the tank, pay attention to the sealing effect of the sink. Make sure that each gap is filled to avoid water leakage. When the whole installation of the water tank is completed, fill the water tank with water and observe if there is any leakage. If so, find the problem and rework it.
If there is no problem with the drainage test, the sink should be edged. When sealing with silicone, it is necessary to pay attention to the gap, to ensure that the connection gap between the sink and the countertop is even, and there is no water seepage. Clean up the debris left in the sink and adjacent to the installation, avoiding direct flushing of the water pipe.
Afa Kitchen and Bathroom - the world's leading manufacturer of high quality stainless steel kitchen sinks, stainless steel kitchen cabinets, stainless steel kitchen faucets and stainless steel bathroom faucet products.
AFA always believes that there is no future without quality and innovation. AFA insists: first consider quality and then consider cost. First quality, then output. Over the years, AFA has continued to revolutionize kitchen and bathroom products with superior quality, innovation and market acumen. For more information visit: https://www.afastainlesskb.com