Installation method of Bathroom Cabinet Wall-mounted:

1. After confirming that there is space for the overall washing machine cabinet, start to arrange the location of water, electricity and plugs. This is the most important level and the easiest to cause problems. In principle, the water and electricity layout is like this: the faucet enters the water and The power plug of the washing machine is placed on the side of the sink, which is about 50cm above the ground. This is because when the general washing cabinet manufacturers design products, the back of the sink is empty, which is convenient for angle valves, faucets and other installations. In addition, there are usually more double-door cabinets under the sink. If there is a problem with the water and electricity and need to be repaired, it is easy to open the door.

2. Another important location is the location of the drain. The drain is usually dedicated to the washing machine and one dedicated to the sink, which is convenient for installation and prevents overflow during use. Do not leave the drain in the middle of the washing cabinet. It is easy to find a dilemma during installation. There is only one drain, just under the foot of the sink, and neither side can be used.

3. It is recommended that the position of the drainer is also placed behind the sink cabinet as the water inlet, so that it is easy to install. Usually, there is very little space available under the washing machine, and the drain pipes are all on the side, so the location of the lower water pipe is best to be on the side of the washing machine.

4. Washing cabinets of any material will turn yellow if exposed to sunlight all year round. So when the washing cabinet is not in use, finally install a curtain on the balcony window.