Observation Elevators Exporter introduces the details of elevator usage:
1. The elevator is equipped with landing doors, car running direction indicators, math display car, running position indicator and elevator call button at each service landing. When the elevator call button is used, press the up direction button when going upstairs, and press the direction button when going downstairs.
2. When the car arrives, the floor direction indicator shows the direction of movement of the car. Passengers judge the direction they want to go and enter the car after confirming that the elevator is normal. Pay attention to the closing of the door leaf and do not stay at the docking place between the landing door and the car door.
3. There are position indicator, control panel, door open/close button and floor selection button in the car. After entering the car, press the floor selection button of the floor you want to go to. If you want the car door to close immediately, you can push the door-close button. The car floor position indicator shows that it has arrived at the floor and can leave after the car door is opened.
4. The elevator has a rated load of 13 people, and it cannot be overloaded. Please exit when people are overloaded.
5. Passenger elevators cannot be used as freight elevators frequently, and it is absolutely not allowed to transport flammable and explosive products.
6. When there is an abnormal phenomenon or malfunction in the elevator, keep calm and call the rescue call in the car. Do not pry the door without authorization and try to escape from the car.
7. Passengers are not allowed to rely on the car door, smoking and littering in the car, and keep the car clean and hygienic.
8. Passengers should take good care of the elevator facilities, and should not press buttons and pry the doors indiscriminately.
9. The driver must strictly perform his job duties, and shall not stay away from his job during the operation of the elevator, and promptly handle and report failures found.
10. The driver is not allowed to use the inspection and emergency stop button as the cancellation call signal before the normal operation starts; it is not allowed to use the inspection speed when the floor or car door is opened; it is not allowed to open the car top trap door and safety door ; It is not allowed to load and transport over-long objects at the inspection speed; it is not allowed to use the opening and closing of the manual car door as the starting or stopping function of the elevator; it is not allowed to change direction suddenly during exercise.
11. The driver should always check the operation of the elevator, contact the elevator regularly for maintenance, and keep a record of maintenance.
12. When the elevator is out of use, the driver should stop the car at the base station, turn off all the switches on the operating panel, and close the landing doors. In the event of a power outage notice, do the work of stopping the elevator in advance.