With the development of science and technology, the product equipment is updated very quickly, and the operation of the laser pipe cutting machine is becoming more and more simple and convenient. But as a novice of laser pipe cutting machine equipment, is it quick to get started? How should we operate it? Today we will tell you about the safe operation specifications of CNC laser pipe cutting machine.

Precautions before use laser pipe cutting machine

1. The operator should receive training, be familiar with cutting software, equipment structure, performance, and master the operation of the operating system.

2. Wear labor protective equipment, and must wear protective glasses that meet the regulations near the laser beam.

3. Check that the laser, laser head, and machine are free of oil and other irrelevant materials, and the waste materials are placed according to regulations.

4. Check whether the lubrication points of the laser pipe cutting machine are short of oil, whether the moving mechanism is loose, and whether the safety protection device is reliable.

5. Check whether the water temperature of the chiller is normal; whether the gas meets the cutting requirements of this time.

Precautions in use laser pipe cutting machine

1. Turn on the machine in the order of switching on and off to prevent the electrical components of the machine from being burned out.

2. Start the motor of the laser pipe cutting machine to check whether the system pressure is kept within the specified range. If it is high, it will damage the hydraulic components and waste power. If it is too low, it will affect the work.

3. When the liquid gas is turned on, the human face must not face the gas exhaust port.

4. Adjust the required position of the laser pipe cutting machine parts and the correct position of other accessories.

5. After confirming the material, thickness and size of the cutting material, adjust the cutting parameters and simulate the cutting procedure to ensure that it is correct before executing the cutting procedure.

6. When operating the laser pipe cutting machine, it is forbidden to put hands or other objects into the work area. In case of emergency, press the emergency stop button, then turn the rotary switch to the manual position, and reset it manually. If any failure occurs, report for repair in time .

Daily maintenance precautions of laser pipe cutting machine

1. After the laser pipe cutting machine is working, cut off the power supply and do a good job of cleaning and lubrication.

2. Remove residues and irrelevant materials around the equipment in time.

The above content is about the operating procedures for novice personnel to use the CNC laser pipe cutting machine. I hope it will be helpful to you. When using the laser pipe cutting machine, we must pay attention to the operation process and precautions of the equipment to avoid accidents. Only correct operation can maintain safe production and ensure production efficiency while protecting oneself.

CNC Laser pipe Cutting Machine Exporter - Qiaolian & Cylion

Qiaolian & Cylion adheres to the tenet of "taking quality as the benchmark and taking service as the root". From the design and production of fiber laser cutting machines to the testing and application of the entire product, they all follow the spirit of "professionalism, dedication, and dedication". The process and every link are rigorous and responsible, and strive for excellence. We specialize in the supply of various CNC lathes such as fiber optic metal laser cutting machines, welcome to consult us!

https://www.qiaoliangroup.com/CNC-laser-pipe-cutting-machine-safety-operation-specification.html