In the paper and packaging industry, testing the peel strength of materials is an important part of the manufacturing process. This means that the materials should be able to withstand the elements and remain intact. One way to do this is to test the durability of adhesives against peeling forces. Presto offers a high-quality peel strength tester that is used to quantify the peel ability of forces and other pressure-sensitive materials. This quality and standardized Peel / Seal / Bond and Adhesion strength tester will provide the materials with high-quality features that make it easy for the manufacturers to conduct adhesion test on the materials. The peel strength of a material is the force required to peel the material off of a substrate. In this blog post, we will discuss the importance of testing the peel/seal/bond and adhesion strength of the materials. We will also focus on how Presto bond strength test will be used to test the peel ability of the materials.
Why is peel strength important for packaging materials?
Packaging materials are subject to a wide variety of forces during transportation, storage, and use. Therefore, it is important to test the peel strength of these materials to ensure that they will not fail under the conditions they will be subjected to. There are many methods for testing peel strength, so it is important to choose the one that best simulates the conditions the packaging material will be exposed to. By doing this, you can ensure that your packaging will not fail and cause expensive product damage or safety issues.
Peel strength is important for packaging materials because it helps ensure that the contents of the package are not damaged during shipping and handling. If the peel strength of a packaging material is too low, the contents of the package may be damaged during shipping and handling.
One can easily perform a 180-degree peel test & 90-degree peel test on the materials because it allows how the material will be tested easily against peel strength. You can easily determine the durability of adhesives by effectively testing them with a Presto peel strength tester.
Now, let us discuss the features and technical specifications of the Presto peel strength tester.
Features of Presto peel strength tester
A peel-strength tester is considered to be one of the high-quality lab testing instruments that are used to determine the peeling force of a material. The peel strength of a material is the force required to peel the material off of a substrate. This high-quality lab testing equipment is used to test the peel ability of materials with ease. You can easily read about the features of this high-quality lab testing equipment.
- High testing ranges from 5 kgf to 20 kgf.
- Vice-type clamping grips for firm gripping of the test specimen.
- Highly sensitive Z-type load cell sensor for accurate analysis of load.
- Advanced peak load indicator for accurate readout and storage of test results.
- Limit switches protection for the protection of grips and the machine.
- Powder-coated body with corrosion resistance.
- Available in different capacities as per client’s requirements
- Feather touch controls and VFD drive with multi-speed facility available
- Bright LED Display
Technical Specifications of Presto peel tester
- Load Cell Capacity: 20 Kgf
- Display: LED (Digital)
- Accuracy: ± 2% at Full Load (with master load)
- Least Count/Resolution: 0.020 kgf
- Power: 220V, Single phase, 50 Hz
- Speed: 300 mm/min ± 5%
- Standards: ASTM D903
With these high-end features and technical specifications, one can easily test the peel ability of materials against high peeling forces. You can easily test the peeling ability of materials and ensure that quality materials will be delivered.
If you want a sample testing session regarding this quality lab testing equipment, then you can give us a call at +91 9210903903 or email us at email@example.com. Our technical experts will get in touch with you and guide you well regarding your queries.
Source link – https://www.prestogroup.com/articles/determine-the-bond-and-peel-strength-of-adhesives-with-the-presto-peel-tester/