If you're wondering how to fix a broken tail light, you've come to the right place! In this blog post, we'll be walking you through the steps to fix a broken tail light in three easy steps. With some basic tools, you can easily repair your tail light and get back on the road in no time. Read on to learn how to fix a broken tail light quickly and easily!
Fixing a broken tail light can be a daunting task, but it doesn't have to be. With the right supplies and just a few simple steps, you can have your tail light back up and running in no time. The first step is to gather the materials needed. To fix a broken tail light, you'll need a new plastic cover for the light, some heavy duty adhesive, and a few tools like a Phillips screwdriver and pliers. Once you have the supplies ready, you're ready to move on to the next step. The next step is to remove the old light fixture and take note of how all of the wiring connects. Next, disconnect the wires from their connectors by pushing on them with a pair of pliers or by removing them with a Phillips head screwdriver. Once all of the wires are disconnected, remove all screws that hold down the light fixture, then pull off the fixture itself and set it aside where it won't get dirty or damaged. Now you're ready for your final step: installing your new one! First put down an even layer of heavy duty adhesive onto any parts that were holding down the old fixture before setting your new one into place. Press firmly so that there are no air bubbles between its base and wherever you applied glue before giving everything about 10 minutes to dry out before turning on or plugging in anything electrical. You should now see why we called this project How to fix broken tail lights in three easy steps!
Remove the damaged tail light
The first step in fixing a broken tail light is to remove the damaged piece of plastic. To do this, you'll need to locate the mounting screws that hold the tail light in place. These will usually be located on the bottom of the tail light or on the side, depending on your vehicle's make and model.
Once you have located these screws, use a Phillips screwdriver to unscrew them and carefully remove the tail light from its mount. Be careful when removing the tail light, as it may be fragile due to the broken plastic. You may also need to remove any other fasteners that are holding the tail light in place before it can be fully removed.
When the tail light is free from its mount, you'll need to carefully remove the broken pieces of plastic. Use a flathead screwdriver to help pry off any stubborn pieces that are stuck in place. Once all of the broken plastic has been removed, you can proceed to step two of fixing your broken tail light.
Clean the area around the new taillight
Once you have your new taillight and the necessary tools, the next step in how to fix broken tail light is to clean the area around the new taillight. It's important to make sure that the area is free of dirt and debris so that the new taillight will be securely attached. First, wipe down the area with a damp cloth or paper towel to remove any dirt or dust. Then, use rubbing alcohol and a clean cloth to make sure the area is completely clean and free of any oils or residue. Once the area is clean and dry, you can proceed with installing your new taillight. To start, attach the new tail light to the back of your car with screws and bolts according to manufacturer specifications. If you are using adhesive instead, ensure that it is cleaned properly before attaching it to the back of your vehicle. The final step for how to fix broken tail light is reattaching your bumper cover if applicable. To do this, carefully line up the edges of the bumper cover with those on either side and push firmly until it locks into place.
Install the new taillight
Now that you have the new taillight and the wiring harness, you're ready to install the new taillight. First, make sure the plastic around the taillight is cleaned of any dirt and debris, as this can interfere with the light's fit. Unscrew the mounting screws and remove the old taillight. Now, connect the wiring harness to the new taillight and secure it in place with the mounting screws. Make sure the wiring harness is snugly connected and that the new taillight is firmly in place. You should also double-check to ensure the tail light plastic is properly secured and that no wiring is exposed. Once your taillight is securely installed, you're done! Learn how to fix broken tail light plastic