Have you ever been vacuuming and then realized you have a ton of dirt and hair stuck in the vacuum cleaner’s filters? If so, this guide is for you! In it, we’ll show you how to empty your Shark vacuum cleaner and get all that dirt and hair out.
What is a Shark Vacuum Cleaner?
Shark vacuum cleaners are known for their powerful suction and ability to clean quickly and thoroughly. They are often used in homes with high-pile surfaces, such as carpets, stairs, and hardwood floors. They come in a variety of models and sizes, and can be convenient to use because they have a Cordless vacuum cleaner design. To empty your Shark vacuum cleaner, follow these steps:
1. Turn off the vacuum cleaner and unplug the power cable.
2. Remove the dustbin from the vacuum cleaner by lifting it up and pulling it out.
3. Empty the dustbin contents into a trashcan or recycling bin.
4. Locate and remove the belt cover on the front of the vacuum cleaner. The belt cover should be easy to remove; just push down on one corner and pull it off.
5. Lift up the hose from the bottom of the vacuum cleaner to reveal the motorized brush unit and cleaning tools. The brush unit can be detached by pressing down on two levers located near either side of it, then rotating it until it clicks into place (it should now be facing away from you). Lift up on each end of the tool housing to detach it from the
image source: https://www.pinterest.ph
How to Empty a Shark Vacuum Cleaner?
Empty your Shark vacuum cleaner according to the Vacuum cleaner Supplier and manufacturer's instructions.
Conclusion
If your shark vacuum cleaner is not picking up dirt or hair as well as it should, there may be a problem with the filter. To clean this yourself, remove the cover and unscrew the filter. Make sure to wash it thoroughly in fresh water before re-installing it. If you need help fixing your shark Handheld vacuum cleaner, please call our team of experts at 1-800-VACUUMCLEANER for assistance. We're here to help!
image source: https://www.pinterest.ph