How to connect the handset with two ways 3.5mm audio jack?

We use our phones all the time, and we rely on them to stay in touch with friends and family. But what if you can’t use your phone because of a damaged or lost audio jack? Luckily, there are ways to connect your handset with two ways 3.5mm audio jack, no matter what kind of phone you have. In this blog post, we will teach you how to do just that.

What is a 3.5mm audio jack?

The 3.5mm audio jack is the most common connector for headphones, speakers, and microphones. It’s used on devices like phones, tablets, laptops, and gaming consoles.

To connect the handset with two ways .mm audio jack:

1. Open the handset’s case and locate the three.5mm audio jack. On some devices, the jack may be hidden under a sticker or behind a cover.

2. Plug one end of the 3.5mm audio cable into the 3.5mm audio jack and plug the other end into your device’s headphone or speaker port.

3. Turn on your device and listen to music or take phone calls!

 

image source: https://www.pinterest.ph

How to connect the handset with two ways 3.5mm audio jack?

There are two ways you can connect a handset with a 3.5mm audio jack: using an adapter or by using the headphone port.
If you want to use an adapter, connect the audio input of the adapter to the 3.5mm audio output of the handset. Then use the adapter's network cable to connect it to your network or computer.
If your handset has a headphone port, just insert a headphone into it and you're good to go.

How to connect the handset with Bluetooth?

If you want to connect your handset with Bluetooth, you have two ways to do it. You can use the USB cable that came with your handset or you can use the audio jack. To connect using the USB cable, first locate the USB port on the handset and plug in the USB cable. Then power up your handset and wait for it to find the Bluetooth connection. When it does, a pop-up message will appear asking if you want to connect with a device. Choose Yes and enter the PIN code of the device you want to connect with. Once connected, your handset will show a list of devices that are connected to it. To disconnect from a device, just choose No from the pop-up message and then unplug the USB cable from the handset.

To connect using the audio jack, first turn off your handset and then remove the battery cover by gently pushing down on one side and pulling outwards. Next, locate and push down on one end of the audio jack until it pops out of its socket. Then slide it into place in its new location so that it lines up properly. Finally, replace the battery cover by gently pushing down on one side and pulling outwards.

Additionally, there are various kinds of handset that is available in the market that you may try including Industrial telephone handsetmilitary handsetpayphone handset, and a lot more.

image source: https://www.pinterest.ph

How to connect the handset with a USB port?

To connect the handset with a USB port, plug in the USB cable into the handset and into the computer. The computer will recognize the handset as a storage device and allow you to access its files. To connect the handset with two ways .mm audio jack, first connect the black earpiece (analog) end of the audio cable to the black jack on the right side of the handset, and then connect the red earpiece (digital) end of the audio cable to the red jack on the left side of the handset.