As we know, there are different lights on the router that indicates the network condition of the router. Each light has a significant meaning to it. You can know the state of connectivity through these lights. If a light is stable it usually means that the network strength is strong or the function performed is successful. If you notice any light blinking it means that there can be a possible error which needs to be resolved. If you see Xfinity router blinking blue, it means that the WPS pairing mode is on. The router is in the process of establishing a connection with another device through the WPS method. After the connection has been established successfully, the light will turn steady white. But if you still see Xfinity router flashing blue after the process has ended. It means that the router has not been able to find a stable connection. It can happen if the router or modem is faulty. The wires may not be properly connected to the router. Another cause can be a fault splitter. Service outage in the area can also cause the router to blink blue light.

Let’s have a look at some of the solutions to fix the blinking blue light on the router.

Ways to fix Xfinity router blinking blue:

• The first troubleshooting step is to restart the router.
• Perform a soft reset using the reset button at the back of the router.
• Check the splitter and replace it if it’s damaged.
• Try connecting the device using the WPS mode again.
• Disconnect the router from the modem and reconnect it.
• Set the router back to factory default settings.

Another issue that users face is Comcast IP address range of the router not turning on. In that case, you can login through Comcast router IP address and navigate to settings. Open a web browser in a device connected to the router. The type the default IP address of the router. The default IP address of Comcast router is 10.0.0.1. Type it in the search bar and click enter. Then, login through the default credentials and navigate to settings to check the error.

If you find Xfinity WiFi not working, contact your ISP and check if there’s any maintenance breakdown or service error in the area. Another issue is Xfinity router blinking orange. It could be internal hardware issue. It can be resolved by a simple process of restarting your device. Follow these steps to do so.

• Turn off the router and make sure to disconnect all cables attached to it.
• Disconnect the Ethernet cable connecting the router to the modem.
• Wait for a few minutes and then connect all the cables to their specific slots carefully.
• Turn on the router to check if it works.

The errors in the router should be resolved by following the steps mentioned above.