Are you one of the Windows Users who came across a 0x800F0923 upgrade error? This error message usually emerges during the Windows 10 upgrade. You are able to download the update, while during the upgrade process, the Error Code 0x800F0923 attempts to block the action.

The Microsoft engineers claim the error to be a cause of incompatible device drivers with the Windows 10 operating system, and DuplexSecure’s SPTD drivers are supposedly the main culprit that triggers the issue most frequently.

Furthermore, other reasons for the 0x800F0923 error include low disk space, specifications lesser than the required, old hardware, etc. There are further causes that may result in this kind of upgrade error, and there are solutions to each cause. These solutions have been further conferred to help you get over such issues.

 Also Read :- How To Fix mouse freezes windows 10

Error Code 0x800F0923 Fixing Techniques

There are various methods you can use to trigger the 0x800F0923 upgrade error. Some of them are discussed below.

Updating Drivers

Having gone through the Windows 10 update, you might have encountered a 0x800F0923 error, blocking you from updating Windows. This may be dealt with by updating the existing device drivers on your system. You can do so by using the steps given below:

  •         Click to open a Start menu and type and search for Device Manager. Click on it once you see the menu.
  •         The Device Manager opens up on your screen. Now find the device driver you think is messing up with your Windows update.
  •         Once you get the driver, right-click on it and select the Update Driver option.
  •         If you want to update your graphics card, select the display adapters to expand the menu.
  •         Find the name of your graphics card and right-click on it, then click on Update Driver.
  •         Next, in the new window, click to select Search automatically for the updated driver software option, and follow the instructions on your screen. On finding a suitable update, it will be downloaded and installed on your PC.
  •         If you cannot find the drivers, you can visit the manufacturer’s official website to find the relevant driver there.

 Also Read :- How To Fix mouse lagging

Free up disk space

Your windows upgrade blockage may have resulted due to the full disk space; therefore, you may consider freeing up your hard disk to clear one of the blockages in the upgrading process.

Check for compatibility

While attempting to update your Windows 10, you first need to check your PC’s compatibility with the operating system. To do so, you need to follow the steps given below:

  •         Go to the Get Windows 10 logo at the bottom right corner of your monitor and right-click on it. Then click on Check your upgrade status.
  •         Once the checking process gets completed, click on the three horizontal lines menu on the upper left corner of your screen and click on Check your PC option. Now, wait until the results show any incompatible drivers or software available in the system. Having found any incompatibilities you need to fix them manually or through the required process, and then try to run Windows 10 update.

Diagnose using update troubleshooter

You can also try troubleshooting the 0x800F0923 error by using the steps given below:

  •         Go to the Start menu and search for Settings.
  •         Click on it to open the Settings window, and there select Update & Security.
  •         From the menu in the left pane, select Troubleshoot.
  •         Next, from the right side pane click on the Run the troubleshooter option.
  •         Now, follow the instructions on your screen.

STPD driver uninstall

STPD driver is one of the drivers that is a frequent culprit of triggering the 0x800F0923 error. You can fix the error by uninstalling the STPD driver. To do this, you can consider following the steps given below:

  •         Click to open a Start menu and type and search for Device Manager. Click on it once you see the menu.
  •         The Device Manager opens up on your screen.
  •         Find the driver you seek to uninstall. On locating it, right-click on it and click on Uninstall driver option.
  •         A small window opens up. Click on Uninstall to continue with the process.

There is an alternative method of uninstalling the STPD driver via the Windows registry. This method includes the following steps:

  •         On your keyboard, press the shortcut Windows + R.
  •         A Run dialog box opens up. Here, type regedit and click on OK.
  •         Next go to HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Services\\Sptd.
  •         On the right side of the pane, click on Start DWORN.
  •         Here, set the value as 4 and then click on OK.

Must Read :- Issues Regarding  mouse stuttering windows 10