MAL20*50 Aluminium alloy mini cylind

Aluminium alloy mini cylinder

※Installation and application

  1. When the load has change during work, it is necessary to select the cylinder with sufficient output force;
  2. At high temperatures or corrosive conditions, it is necessary to select the corresponding high-temperature resistance and corrosion resistance cylinder;
  3. In the cases of high humidity, excessive dust, or water drop, oil dust, and welding slag, necessary protective measures shall be taken for the cylinder;
  4. Before connecting the cylinder to the pipeline, it is necessary to remove dirt in the pipeline to avoid impurity entry into the cylinder;
  5. Medium for the cylinder can be used after being filtered by the filter element above 40 um;
  6. In low temperature environment, it is necessary to take antifreezing measures to prevent water freezing in the system; .
  7. Before use, the cylinder shall undergo no-load test run; before running, it is necessary to adjust buffer to a minimum and then gradually loosen it to avoid cylinder damage due to too large impact;
  8. Avoid the lateral load, otherwise the piston rod will be bent and deformed and damage the rod end thread. The single action type can't be loaded in return stroke
  9. When the cylinder is removed and not used for a long time, it is necessary to pay attention to the surface rust; in addition, air inlet and exhaust port shall be applied with dustproof plug cap additionally. Pay special attention to that front and rear covers can?t be removed.

■Product feature

1 It is applied with the standard and aluminum round pipe cyinder blocdk;

  1. The front and rear covers are connected with the cylinder pipe through threaded connector,
  2. The piston seal is applied with the profiled double direction seal structure, which has compact dimensions and oil storage function;
  3. The front end cover is applied with sel-lubricating bearing for guiding, which has good lubricatin and guiding perfomance;
  4. With a variety of rear cover forms, the cylinder nstallation is more convenient;
  5. The cylinder and cylinder nstallation accessories with different specifications are ailable for the customer's selection and use;