There is a wide range of automatic twisting machines on the market, but the careful customer will notice that they are named based on certain specifications and grounds. You can easily understand the purpose of the machine by its name. Here it is necessary to start with an introduction to automatic winding twisting machines.

There is a way to tell when a twisting machine is abnormal by sound.

KV2005-HIGH-TECH-TWISTING-MACHINE

During the twisting process of an automatic twisting machine, you will hear a very subtle "mmm" sound, which is the sound of the motor turning, a "pull" sound of the guide sliding when the shaft slides, and occasionally the sound of the air pump releasing air. The sound is generally pleasant to the ear and not harsh. An experienced person can tell if the twisting machine is abnormal by the sound.

If screws are not tightened or if parts need to be fitted but no screws are fitted, the inertial impact of the twister parts during operation may cause the parts to come loose, which can happen in severe cases. If the base of the machine is not heavy enough or the floor is uneven, the machine will shake and make a "clattering" sound during operation; if the bearings are not lubricated enough, there will be a "sizzling" sound in the bearing cavity of the machine. Insufficient lubricating oil in the bearings results in a "sizzling" sound in the bearing cavity; damaged steel balls in the bearings result in a "gurgling" sound when running; loose rotor parts, such as loose counterweight screws on the cage rotor blades or loose rotor shafts, will produce a knocking sound in the twisting machine; bent shafts or worn bearings will also produce vibration and uneven friction sounds in the twisting machine; the wire varnish The wear of the wire varnish can cause two wires to intersect, resulting in a "tonic sound". However, a short circuit has already been caused and can cause serious damage to the electronic components, so regular inspection and maintenance is more important than remedial action!

New Heli Textile Machinery, specialize in research and production of one-step twisting machines over two decades, located in the vicinity of the Qiantang River, Hangzhou City, China.

High efficiency & high quality and low energy consumption & low labor cost are the common advantages of our product. New Heli always updates the old version and innovates new machines as per real-time market needs. KV2005, KV2008 series, KV2012 and KV2016 are the main products, which drive the quality of filament sewing and embroidery thread and set a new standard. A warm welcome to you!