There are many advantages of low temperature vacuum brazing. Since the beginning of the 1940s, vacuum brazing technology has become a very promising welding technology. Brazing copper and stainless steel parts first appeared in the electronics industry, and later applied to the aviation industry, and atomic energy industry, and began to be applied to the manufacture of stainless steel...

Radiator manufacturer Sanqian knows that the word radiator is familiar to everyone. Many times we need to use radiators. The types and functions of radiators are also different. For example, there are heating radiators, car radiators, computer radiators, etc., as well as chip radiators, LED radiators, air-cooled radiators, and even projector radiators and other radiators with different...

Are you helpless when faced with common problems of radiators in heating in your daily life? There are actually many treatments for common problems of radiators, let the radiator company Sanqian take you through them. 1. What should you do if the radiator runs out of water during heating? Radiator company Sanqian answers your questions When the radiator runs out of water, if...

Brazing properties of aluminium and aluminium alloys The brazing properties of aluminum and aluminum alloys are poor, mainly because the oxide film on the surface is difficult to remove. Aluminum has a high affinity for oxygen, and it is easy to form a dense and stable oxide film Al2O2 on the surface with a high melting point. At the same time, the aluminum alloy containing magnesium will...

With the arrival of the golden season of home improvement, the finned tube radiator market has ushered in another sales peak. As the whole finned tube radiator market is mixed, the quality and performance of the selected finned tube radiator will be directly related to the safety, economy and decoration of its use. Therefore, consumers must be careful and careful when choosing finned tube...

The structure of the tube-and-belt radiator: pipe + heat-dissipating belt, the cross-section of the pipe is basically rectangular, the heat-dissipating belt is S-shaped or U-shaped, and the heat-dissipating belt and the pipe are fitted. The core body of the tube-and-belt radiator is generally distributed in an elliptical aluminum tube and a curved wavy aluminum strip. When the fluid (gas,...

In the area of thermal management, folding sheet metal allows us to increase the surface area within a given volume. Surface area is critical for efficient heat transfer. Folded fins also minimize the number of components used to assemble heat transfer components, such as water cooling plate spoiler folded fin heat sinks or larger heat exchangers. Because the fin stack is made from a single...

The radiator is a kind of temperature exchanger.Before the car starts, radiator fluid (also called antifreeze or coolant) is already inside the engine. The coolant is already placed strategically in the engine so that when the car warms up, it can begin its work to regulate the temperature of the engine. A car’s engine can produce so much heat that the coolant inside can reach...

After all,radiators are simple machines. Hot coolant is pumped into them from the engine, the coolant is then pushed through a series of parallel tubes, either through pressurization or baffles. As the coolant makes contact with the tubes of the radiator, the heat is then conducted to the fins, which are bonded to the outside of the tubes. As the heat transfers to the fins, the cooling fan...

A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. In thermodynamics a heat sink is a heat reservoir that can absorb an arbitrary amount of heat without significantly...